2524-T3铆接接头与搅拌摩擦焊接接头疲劳性能对比研究

张彦军; 李小鹏

doi:10.16579/j.issn.1001.9669.2015.03.014

您当前的位置：

首页 >

文章列表页 >

2524-T3铆接接头与搅拌摩擦焊接接头疲劳性能对比研究

实验研究·测试技术 | 更新时间：2022-09-22

- 2524-T3铆接接头与搅拌摩擦焊接接头疲劳性能对比研究
- RESERACH ON FATIGUE BEHAVIOUR COMPARISON OF ALUMINUM RIVETED JOINT AND FRICTION STIR WELDING JOINT
- 机械强度 2015年37卷第3期页码：429-434
- 作者机构：
  
  1. 中航工业第一飞机设计研究院
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2015.03.014
  中图分类号：
扫描看全文
张彦军, 李小鹏. 2524-T3铆接接头与搅拌摩擦焊接接头疲劳性能对比研究[J]. 机械强度, 2015,37(3):429-434.

ZHANG YanJun, LI XiaoPeng. RESERACH ON FATIGUE BEHAVIOUR COMPARISON OF ALUMINUM RIVETED JOINT AND FRICTION STIR WELDING JOINT[J]. 2015,37(3):429-434.
张彦军, 李小鹏. 2524-T3铆接接头与搅拌摩擦焊接接头疲劳性能对比研究[J]. 机械强度, 2015,37(3):429-434. DOI： 10.16579/j.issn.1001.9669.2015.03.014.

ZHANG YanJun, LI XiaoPeng. RESERACH ON FATIGUE BEHAVIOUR COMPARISON OF ALUMINUM RIVETED JOINT AND FRICTION STIR WELDING JOINT[J]. 2015,37(3):429-434. DOI： 10.16579/j.issn.1001.9669.2015.03.014.

摘要

通过2524-T3铝合金的搅拌摩擦焊接头疲劳性能对比试验,得到了母材、FSW对接接头、铆钉连接接头的疲劳S-N曲线。试验表明,搅拌摩擦焊的疲劳裂纹大多数起源于焊缝底部;2524-T3材料薄板的疲劳性能略好于厚板的疲劳性能;搅拌摩擦焊接头疲劳性能要明显好于铆接接头疲劳性能。拟合得到了各种不同厚度,不同应力比下的S-N曲线公式,为搅拌摩擦焊技术应用于飞机结构积累了相关数据。

Abstract

S-N curves of 2524-T3 parental material,FSW joint,riveted joint were obtained by fatigue test of FSW comparative specimens. Result revealed that firstly fatigue cracks in FSW joints were mostly initiated from bottom of the weld seam. Secondly,fatigue behavior of thin plate was slightly better than that of thick plate. Finally,fatigue behavior of FSW joint was significantly better than that of riveted joint. S-N curves for variable thicknesses and stress ratios were fitted,which provided correlative data for application of FSW technology to aircraft structures.

关键词

铝合金搅拌摩擦焊接头S-N曲线疲劳

Keywords

Aluminum alloyFriction stir weldingJointS-N CurveFatigue

references

浏览量

240

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

有机玻璃疲劳寿命估算的频率修正法

SUS304不锈钢点焊接头疲劳寿命研究

一种子结构刚度对阵面骨架刚度贡献度的评价方法

焊接小管道疲劳试验与裂纹扩展数值仿真分析

不同结构参数对7075铝合金耳片疲劳裂纹扩展寿命的影响