ANALYSIS OF TOоTH PROFILE AND MESHING CHARACTERISTICS OF DOUBLE CYCLOID PIN GEAR TRANSMISSION

CUI JianKun; DING JiaLe; SHI YuHeng; ZHANG DeQi

doi:10.16579/j.issn.1001.9669.2024.02.022

您当前的位置：

首页 >

文章列表页 >

ANALYSIS OF TOоTH PROFILE AND MESHING CHARACTERISTICS OF DOUBLE CYCLOID PIN GEAR TRANSMISSION

更新时间：2024-07-05

- ANALYSIS OF TOоTH PROFILE AND MESHING CHARACTERISTICS OF DOUBLE CYCLOID PIN GEAR TRANSMISSION
- Journal of Mechanical Strength Vol. 46, Issue 2, Pages: 424-430(2024)
- 作者机构：
  
  1. 上海理工大学上海-汉堡国际工程学院
  2. 上海理工大学机械工程学院
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2024.02.022
  CLC： TH132.414
- Published：15 April 2024，
- 稿件说明：
移动端阅览
CUI JianKun, DING JiaLe, SHI YuHeng, et al. ANALYSIS OF TOоTH PROFILE AND MESHING CHARACTERISTICS OF DOUBLE CYCLOID PIN GEAR TRANSMISSION. [J]. Journal of Mechanical Strength , 2024,46(2):424-430.
DOI：

CUI JianKun, DING JiaLe, SHI YuHeng, et al. ANALYSIS OF TOоTH PROFILE AND MESHING CHARACTERISTICS OF DOUBLE CYCLOID PIN GEAR TRANSMISSION. [J]. Journal of Mechanical Strength , 2024,46(2):424-430. DOI： 10.16579/j.issn.1001.9669.2024.02.022.

摘要

将双摆线齿廓运用到NN型少齿差行星齿轮传动领域，通过分析内外摆线轮齿廓的凹凸性、曲率和曲率半径，获得了内、外摆线齿廓的特性；通过图解法推导双摆线针齿传动中内、外摆线轮的压力角计算公式，获得了啮合过程压力角变化规律，以及双摆线针齿主要参数对于内、外摆线轮压力角的影响；通过对等距修形和移距修形进行研究，表明齿廓修形对齿形有明显影响。

Abstract

The double cycloid tooth profile was applied to the NN type planetary gear transmission with small tooth difference. By analyzing the concavity

curvature and radius of curvature of the inner and outer cycloid tooth profile

the characteristics of the inner and outer cycloid tooth profile were obtained. Through the graphic method

the calculation formula ofthe pressure angle of the inner and outer cycloid gears in the double cycloid pin gear transmission was derived

and the variation law of the pressure angle in the meshing process and the influence of the main parameters of the double cycloid pin gear on the pressure angle of the inner and outer cycloid gears were obtained. Through the study of equidistant modification and shift modification

it is shown that the tooth profile modification has a significant impact on the tooth profile.

关键词

双摆线针齿传动齿廓特性齿廓修形压力角

Keywords

Double cycloid pin gear transmissionTooth profile characteristicsProfile modificationPressure angle

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

No data

Related Author

No data

Related Institution

No data

⁰