EXPERIMENTAL STUDY ON INFLUENCE FACTORS OF DYNAMIC FRACTURE TOUGHNESS SIZE BASED ON CT SAMPLE

ZOU GuangPing; WU SongYang; YAN AnShi; LI YinChen; ZHANG ZhiJun; CHANG ZhongLiang

doi:10.16579/j.issn.1001.9669.2023.06.008

您当前的位置：

首页 >

文章列表页 >

EXPERIMENTAL STUDY ON INFLUENCE FACTORS OF DYNAMIC FRACTURE TOUGHNESS SIZE BASED ON CT SAMPLE

更新时间：2024-06-07

- EXPERIMENTAL STUDY ON INFLUENCE FACTORS OF DYNAMIC FRACTURE TOUGHNESS SIZE BASED ON CT SAMPLE
- Journal of Mechanical Strength Vol. 45, Issue 6, Pages: 1326-1331(2023)
- 作者机构：
  
  哈尔滨工程大学航天与建筑工程学院
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2023.06.008
  CLC： TG113.25
- Published：15 December 2023，
扫描看全文
ZOU GuangPing, WU SongYang, YAN AnShi, et al. EXPERIMENTAL STUDY ON INFLUENCE FACTORS OF DYNAMIC FRACTURE TOUGHNESS SIZE BASED ON CT SAMPLE. [J]. Journal of Mechanical Strength 45(6):1326-1331(2023)
DOI：

ZOU GuangPing, WU SongYang, YAN AnShi, et al. EXPERIMENTAL STUDY ON INFLUENCE FACTORS OF DYNAMIC FRACTURE TOUGHNESS SIZE BASED ON CT SAMPLE. [J]. Journal of Mechanical Strength 45(6):1326-1331(2023) DOI： 10.16579/j.issn.1001.9669.2023.06.008.

摘要

为研究紧凑拉伸(Compact Tensile

CT)试样尺寸对动态断裂韧性试验的影响，使用分离式霍普金森拉杆(Split Hopkinson Tie Bar

SHTB)装置对2A12T4铝合金CT试样进行了动态断裂测试，通过数字散斑相关法(Digital Speckle Correlation Method

DSCM)计算了试样的动态断裂韧性，并对比应变片法计算结果说明了此种方法的正确性。研究试件的不同大小和加载孔位置对动态断裂韧性的影响，研究结果表明，W/B的值越小，CT试样动态断裂韧性值越小且降低的趋势逐渐变缓，对于W/B值相同的不同尺寸试样，其动态断裂韧性差距很小，改变加载圆孔圆心距对动态断裂韧性试验结果影响较小。

Abstract

In order to study the influence of compact tensile (CT) specimen size on dynamic fracture toughness test

a dynamic fracture test of 2112T4 aluminium alloy CT was carried out based on a split Hopkinson tie bar (SHTB) device. The dynamic fracture toughness of the specimen was calculated by digital speckle correlation method( DSCM)

and the correctness of this method was demonstrated by comparing the results of strain gauge method. The influence of different sizes of specimens and loading hole locations on dynamic fracture toughness was studied. The results show that the smaller the value of W/B

the smaller the dynamic fracture toughness value of CT specimens and the slower the decreasing trend. For samples of different sizes with the same W/B value

the dynamic fracture toughness gap is small. Changing the center distance of loading round hole has little influence on the experimental results of dynamic fracture toughness.

关键词

紧凑拉伸试样数字散斑相关法动态加载断裂韧性霍普金森拉杆

Keywords

Compact tensile specimensDigital speckle correlation methodDynamic loadingFracture toughnessSplit hopkinson tie bar

references

Views

176

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

胶接结构Ⅲ型断裂性能研究

Related Author

张超锋

谢春莉

王伟利

朱佳佳

Related Institution

江南大学机械工程学院

苏州江南航天机电工业有限公司

⁰