STUDY ON BEND-TWIST COUPLING CHARACTERISTICS OF WEB OFFSET FOR LARGE WIND TURBINE BLADES (MT)

WANG HaiSheng; MIAO WeiPao; LI Chun; ZHANG Li; YAN YangTian; LI Zhi Hao; YUE Min Nan

doi:10.16579/j.issn.1001.9669.2023.04.018

您当前的位置：

首页 >

文章列表页 >

STUDY ON BEND-TWIST COUPLING CHARACTERISTICS OF WEB OFFSET FOR LARGE WIND TURBINE BLADES (MT)

更新时间：2023-09-25

- STUDY ON BEND-TWIST COUPLING CHARACTERISTICS OF WEB OFFSET FOR LARGE WIND TURBINE BLADES (MT)
- Journal of Mechanical Strength Issue 4, Pages: 887-893(2023)
- 作者机构：
  
  1. 上海理工大学能源与动力工程学院
  2. 上海市动力工程多相流动与传热重点实验室
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2023.04.018
  CLC：
扫描看全文
WANG HaiSheng, MIAO WeiPao, LI Chun, et al. STUDY ON BEND-TWIST COUPLING CHARACTERISTICS OF WEB OFFSET FOR LARGE WIND TURBINE BLADES (MT). [J]. Journal of Mechanical Strength (4):887-893(2023)
DOI：

WANG HaiSheng, MIAO WeiPao, LI Chun, et al. STUDY ON BEND-TWIST COUPLING CHARACTERISTICS OF WEB OFFSET FOR LARGE WIND TURBINE BLADES (MT). [J]. Journal of Mechanical Strength (4):887-893(2023) DOI： 10.16579/j.issn.1001.9669.2023.04.018.

摘要

为研究大型风力机叶片内部腹板结构偏转对叶片弯扭耦合特性的影响，基于NX二次开发建立NREL 5 MW叶片CAD模型，通过计算流体力学(Computational Fluid Dynamics, CFD)方法求解叶片表面的分布载荷，采用节点位移法求解叶片弯曲角及扭转角，分析腹板偏置对叶片弯扭耦合效应的影响。结果表明，偏置腹板可使叶片产生自适应特性；在气动载荷作用下，弯曲角与扭转角均沿叶展逐渐增大，于叶尖达到幅值；正向偏置时，叶片扭转角与偏转幅度呈负相关，反向偏置与之相反；正偏置结构耦合叶片弯扭耦合系数随偏转角增大呈递减趋势，反偏置叶片均大于传统叶片。

Abstract

In order to research the influence of the web deflection on the bend-twist coupling characteristics of large wind turbine blades, the CAD model of NREL 5 MW blade is established based on NX secondary development, the aerodynamic loads of the blade are obtained by CFD method, the blade bendind angle and twisting angle are solved by the node displacement method to analyze the influence of web deflection for bend-twist coupling blade. The results show that the offset web helps to achieve the bend-twist coupling of blades. Under the action of aerodynamic load, the bending and twisting angle both increase along spanwise direction of blade gradually, and reach the magnitude at the tip of the blade; in forward bias, negative correlation between twist angle and offset, reverse bias is the opposite; positive bias blades bend-twist coupling coefficient is decreasing trend with the increase of deflection angle, reverse bias blade are greater than the conventional blade.

关键词

风力机叶片弯扭耦合特性复合材料结构耦合节点位移法

Keywords

Wind turbine bladeBend-twist couplingComposite materialStructure couplingNode displacement method

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

STUDY ON THE STRUCTURAL CHARACTERISTICS OF LARGE WIND TURBINE COMPOSITE BLADE BASED ON BEND-TWIST COUPLING

THREE POINT BENDING PERFORMANCE OF COMPOSITE HONEYCOMB SANDWICH STRUCTURE (MT)

STUDY ON LOW VELOCITY IMPACT CHARACTERISTICS OF HYBRID COMPOSITE HONEYCOMB SANDWICH STRUCTURE

ANALYSIS OF DYNAMIC LOAD STRENGTH OF WIND TURBINE ROOT BOLT UNDER TURBULENCE MODEL

STUDY ON LATERAL AND LONGITUDINAL STIFFNESS CHARACTERISTICS OF LONG ROUND BELLOW-TYPE AIRBAG ISOLATOR

Related Author

No data

Related Institution

Shanxi Key Laboratory of Material Strength ＆ Structural Impact,Taiyuan University of Technology

Advanced Forming and Intelligent Equipment Research Institute, College of Mechanical and Vehicle Engineering, Taiyuan University of Technology

Huayang New Material Technology Group Co., Ltd.

State Key Laboratory for Strength and Vibration of Mechanical Structures, School of Aerospace,Xi′an Jiaotong University

Institute of Applied Mechanics, College of Mechanical and Vehicle Engineering, Taiyuan University of Technology

⁰