COMPARISON STUDY ON BEARING CAPACITY OF CIRCULAR AND DIAMOND HOLE LAMINATES UNDER SHEAR LOAD

GAO Wei; YAO XiongHua; ZHANG WenJun

doi:10.16579/j.issn.1001.9669.2022.04.009

您当前的位置：

首页 >

文章列表页 >

COMPARISON STUDY ON BEARING CAPACITY OF CIRCULAR AND DIAMOND HOLE LAMINATES UNDER SHEAR LOAD

更新时间：2022-09-22

- COMPARISON STUDY ON BEARING CAPACITY OF CIRCULAR AND DIAMOND HOLE LAMINATES UNDER SHEAR LOAD
- Journal of Mechanical Strength Vol. 44, Issue 4, Pages: 819-824(2022)
- 作者机构：
  
  1. 航空工业第一飞机设计研究院结构设计研究所
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2022.04.009
  CLC：
扫描看全文
GAO Wei, YAO XiongHua, ZHANG WenJun. COMPARISON STUDY ON BEARING CAPACITY OF CIRCULAR AND DIAMOND HOLE LAMINATES UNDER SHEAR LOAD. [J]. 44(4):819-824(2022)
DOI：

GAO Wei, YAO XiongHua, ZHANG WenJun. COMPARISON STUDY ON BEARING CAPACITY OF CIRCULAR AND DIAMOND HOLE LAMINATES UNDER SHEAR LOAD. [J]. 44(4):819-824(2022) DOI： 10.16579/j.issn.1001.9669.2022.04.009.

摘要

基于剪切载荷工况，采用试验和数值计算模拟方法研究含圆形开口、菱形开口复合材料层压板承载能力及其失效模式。研究结果表明：层压板重量相同、开口可达性相同和铺层角度信息相同的前提下，菱形开口层压板承载能力大于圆形开口层压板承载能力；基于非线性连续介质损伤力学(CDM),采用最大应变失效准则预测纤维损伤、三维非线性Puck失效准则预测基体损伤，构建含开口层压板三维有限元模型并进行数值计算模拟，通过与试验结果对比，表明该模型能有效预测含开口层压板承载能力及其失效模式。

Abstract

Based on the shear load case, the bearing capacity and failure mode of composite laminates with circular and diamond holes were studied by test and numerical simulation. The results show: under the premise of the same laminate weight, the same hole accessibility and the same stacking angle information, the load-carrying capacity of the laminate with diamond hole is greater than that of the laminate with circular hole; based on the nonlinear continuum damage mechanics（CDM）, the fiber damage is predicted by using the maximum strain failure criterion, and the matrix damage is predicted by using the three-dimensional nonlinear puck failure criterion A three-dimensional finite element model of laminate is established and numerical simulation is carried out. The comparison with the experimental results shows that the model can effectively predict the bearing capacity and failure mode of laminate with hole.

关键词

复合材料层压板开口连续介质损伤力学失效模式

Keywords

CompositeLaminateHoleContinuum damage mechanicsFailure mode

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

STUDY ON THE EFFECT OF OBLIQUE IMPACT ANGLE ON THE FAILURE CHARACTERISTICS OF ALUMINUM ALLOY SHEET

FATIGUE TEST AND CRACK PROPAGATION SIMULATION OF THE SMALL WELDED PIPE

A CORRECTED COHESIVE ZONE MODEL IN THE INTERLAMINAR FRACTURE OF COMPOSITE

OPTIMIZATION DESIGN OF CABIN STRUT BASED ON ISIGHT AND PYTHON FOR CIVIL AIRCRAFT

APPLICABILITY INVESTIGATION OF FAILURE CRITERION FOR POST-BUCKLING ANALYSIS OF STIFFENED COMPOSITE PANELS

Related Author

No data

Related Institution

College of Aeronautical Engineering,Civil Aviation University of China

Science and Technology on Liquid Rocket Engine Laboratory

Suzhou Nuclear Power Research Institute

Key Laboratory of High Performance Ship Technology of Ministry of Education,Wuhan University of Technology

Leobit Technology Co.,Ltd.

⁰