RESEARCH AND VERIFICATION OF CONTACT STRESS CALCULATION METHOD FOR FIVE-BALL FATIGUE TESTING MACHINE

JIAO Yan; YU QingJie; HAN Song; LIU JinLing; ZHAO SiYang

doi:10.16579/j.issn.1001.9669.2021.05.036

您当前的位置：

首页 >

文章列表页 >

RESEARCH AND VERIFICATION OF CONTACT STRESS CALCULATION METHOD FOR FIVE-BALL FATIGUE TESTING MACHINE

更新时间：2022-09-22

- RESEARCH AND VERIFICATION OF CONTACT STRESS CALCULATION METHOD FOR FIVE-BALL FATIGUE TESTING MACHINE
- Journal of Mechanical Strength Vol. 43, Issue 5, Pages: 1267-1270(2021)
- 作者机构：
  
  1. 中国航发哈尔滨轴承有限公司
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2021.05.036
  CLC：
扫描看全文
JIAO Yan, YU QingJie, HAN Song, et al. RESEARCH AND VERIFICATION OF CONTACT STRESS CALCULATION METHOD FOR FIVE-BALL FATIGUE TESTING MACHINE. [J]. 43(5):1267-1270(2021)
DOI：

JIAO Yan, YU QingJie, HAN Song, et al. RESEARCH AND VERIFICATION OF CONTACT STRESS CALCULATION METHOD FOR FIVE-BALL FATIGUE TESTING MACHINE. [J]. 43(5):1267-1270(2021) DOI： 10.16579/j.issn.1001.9669.2021.05.036.

摘要

为对五球疲劳试验机工装接触应力进行精准计算,通过几何尺寸关系确定工装设计接触角,根据载荷变形关系及公式推导,建立外载荷与工作接触角平衡方程,采用迭代法进行求解,计算出受载下工作接触角,进而得到工装的接触应力,最后针对9.525 mm直径被试钢球的工装实际尺寸,分别采用数值算法与有限元方法进行接触应力对比分析,计算结果偏差小于2%,表明接触应力计算数值方法的可靠性,可以快速准确的用于试验方案制定,为试验工装设计提供指导。

Abstract

To accurately calculate the contact stress of the five-ball fatigue testing machine tooling,the tooling design contact angle is determined by the geometric size relationship. According to the load deformation relationship and the formula derived,the balance equation is established between the external load and the working contact angle. The equation is solved using the iteration method. The working contact angle under load is calculated,and the tooling contact stress is obtained. For the actual size of the 9. 525 mm diameter steel ball tooling,the contact stress comparative analysis is calculated by the numerical algorithm and finite element method respectively. The calculation result deviation is less than 2%. It shows the contact stress numerical algorithm is reliable,it can be used for the test protocol formulation and provide guidance for the test tooling design.

关键词

五球疲劳试验机接触应力工作接触角有限元方法可靠性

Keywords

Five-ball fatigue testing machineContact stressWorking contact angleFinite element methodReliable

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

ANALYSIS OF LOAD-BEARING MESHING CHARACTERISTICS OF CYCLOIDAL PINWHEEL OF RV REDUCER BASED ON FINITE ELEMENT MODELING (MT)

FATIGUE LIFE ANALYSIS OF WING WITH HIGH ASPECT RATIO BASED ON BIDIRECTIONAL FLUID-STRUCTURE COUPLING

RESEARCH ON THE CONTACT STRESS OF ROLLS AND FATIGUE DAMAGE DISTRIBUTION OF BACKUP ROLL IN FOUR HIGH PC MILL

STUDY ON FLAW DEPTH STATISTICS AND CORRESPONDING FATIGUE LIFE OF HELICOPTER ALUMINIUM ALLOY STRUCTURE

DEVELOPMENT AND APPLICATION OF MINING MACHINERY PLANETARY REDUCTION GEARS STRENGTH CHECK SOFTWARE

Related Author

No data

Related Institution

Hebei Key Laboratory of Robot Sensing and Human-Robot Integration, School of Mechanical Engineering,Hebei University of Technology

State Key Laboratory of Reliability and Intelligence of Electrical Equipment, Hebei University of Technology

Mechanical Engineering College,Tianjin University of Science ＆ Technology

Mechanical Engineering College,Shaanxi University of Technology

College of Mechanical and Vehicle Engineering,Taiyuan University of Technology

⁰