STRUCTURAL DESIGN AND EXPERIMENTAL RESEARCH ON THE RUBBER JOINTS OF THE GEARBOX BOOM

WU AnWei; XU DaWei; ZHANG XiangRu; LI LiangYu

doi:10.16579/j.issn.1001.9669.2021.05.032

您当前的位置：

首页 >

文章列表页 >

STRUCTURAL DESIGN AND EXPERIMENTAL RESEARCH ON THE RUBBER JOINTS OF THE GEARBOX BOOM

更新时间：2022-09-22

- STRUCTURAL DESIGN AND EXPERIMENTAL RESEARCH ON THE RUBBER JOINTS OF THE GEARBOX BOOM
- Journal of Mechanical Strength Vol. 43, Issue 5, Pages: 1245-1249(2021)
- 作者机构：
  
  1. 郑州地铁集团有限公司
  2. 郑州机械研究所有限公司
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2021.05.032
  CLC：
扫描看全文
WU AnWei, XU DaWei, ZHANG XiangRu, et al. STRUCTURAL DESIGN AND EXPERIMENTAL RESEARCH ON THE RUBBER JOINTS OF THE GEARBOX BOOM. [J]. 43(5):1245-1249(2021)
DOI：

WU AnWei, XU DaWei, ZHANG XiangRu, et al. STRUCTURAL DESIGN AND EXPERIMENTAL RESEARCH ON THE RUBBER JOINTS OF THE GEARBOX BOOM. [J]. 43(5):1245-1249(2021) DOI： 10.16579/j.issn.1001.9669.2021.05.032.

摘要

为提升标准地铁齿轮箱吊杆橡胶关节使用寿命,分析了橡胶关节疲劳失效的原因,研究了橡胶关节不同结构的特点,设计了一种斜直线橡胶自由面和橡胶厚度渐变式的新型橡胶关节,降低了橡胶自由面的摩擦振幅和应力集中,利用有限元分析软件,通过对新型结构进行耐疲劳优化,改善了产品的结构设计缺陷,提高产品的使用寿命。

Abstract

In order to improve the service life of rubber joints of standard subway gearbox boom,the causes of fatigue failure of rubber joints are analyzed,the characteristics of different structures of rubber joints are studied,a new rubber joint with oblique linear rubber free surface and rubber thickness gradient is designed,the friction amplitude and stress concentration of rubber free surface are reduced,and by using finite element analysis software,the fatigue resistance of the new structure is optimized to improve by optimizing the fatigue resistance of the new structure using FEA software,the structural design defects are improved and the service life of the product is increased.

关键词

疲劳优化橡胶关节结构设计

Keywords

Fatigue optimizationRubber jointsStructural design

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

RESEARCH ON STRUCTURE DESIGN AND SIMULATION TEST OF SIX-DIMENSIONAL DISTURBANCE FORCE SIMULATOR

DESIGN OF BED SADDLE OF HIGH-SPEED PRECISION CNC LATHE BASED ON TOPOLOGY OPTIMIZATION

STRUCTURAL ANALYSIS OF VAN BODY-IN-WHITE

DESIGN AND ANALYSIS OF AN INNER BURR REMOVAL DEVICE IN LONGITUDINALLY WELDED PIPE

DESIGN AND OPTIMIZATION OF COLUMN STRUCTURE OF TREE SHAPED PARKING GARAGE

Related Author

No data

Related Institution

Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences

University of the Chinese Academy of Sciences

School of Mechanical and Precision Instrument Engineering,Xi’an University of Technology

School of Mechatronics Engineering,Henan University of Science and Technology

ChongQing Technology and Business Institute,College of Mechanical and Electrical Engineering

⁰