OPTIMIZATION DESIGN OF TOWER STRUCTURE OF LARGE WIND TURBINE

SHI Hong; XIA ZhiPing; FENG MeiLong; LIU XiaoHong

doi:10.16579/j.issn.1001.9669.2021.04.033

您当前的位置：

首页 >

文章列表页 >

OPTIMIZATION DESIGN OF TOWER STRUCTURE OF LARGE WIND TURBINE

更新时间：2022-09-22

- OPTIMIZATION DESIGN OF TOWER STRUCTURE OF LARGE WIND TURBINE
- Journal of Mechanical Strength Vol. 43, Issue 4, Pages: 992-996(2021)
- 作者机构：
  
  1. 九江职业技术学院机械工程学院
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2021.04.033
  CLC：
扫描看全文
SHI Hong, XIA ZhiPing, FENG MeiLong, et al. OPTIMIZATION DESIGN OF TOWER STRUCTURE OF LARGE WIND TURBINE. [J]. 43(4):992-996(2021)
DOI：

SHI Hong, XIA ZhiPing, FENG MeiLong, et al. OPTIMIZATION DESIGN OF TOWER STRUCTURE OF LARGE WIND TURBINE. [J]. 43(4):992-996(2021) DOI： 10.16579/j.issn.1001.9669.2021.04.033.

摘要

塔架作为风力发电机组的主要承载部件,其性能直接影响风力机的使用寿命与安全,因此对塔架结构进行优化设计尤为重要。以2 MW风力发电机组塔架为研究对象,以塔架质量为优化目标,固频、应力、高度等为约束条件,直径、壁厚和节长为控制变量,通过仿真对塔架进行结构优化,并通过解析求解对仿真进行校核。结果表明,优化设计的塔架不仅减轻了塔架重量4.21%,同时提高了固有频率,避开了共振区间;仿真法与解析法结果对比,应力最大位置一致,解析应力比仿真小22.3%,解析模态一阶模态比仿真大18%,仿真具有一定的可信度;该优化方法具有一定的实用性和工程应用价值,适合推广应用。

Abstract

The tower is the main bearing component of wind turbine,and its performance directly affects the service life and safety of wind turbine. The 2 MW wind turbine tower structure optimization was researched,with the tower quality was taken as the optimization objective,the natural frequency,stress and height was taken as the constraint conditions,and the diameter,wall thickness,pitch length was taken as control variables. The tower structure was optimized by simulation and checked by analytical solution. The results show that the optimized tower has reduced weight 4. 21% and increased natural frequency,the maximum stress position obtained by simulation is the same but 22. 3% larger than the analytical,the analytical first order natural frequency is 18% larger than the simulation. This optimization method has certain practicability and engineering application value,and is suitable for popularization and application.

关键词

风力发电机塔架结构优化仿真分析解析求解

Keywords

Wind turbineTowerStructural optimizationSimulation analysisAnalytical solution

references

Views

355

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

STUDY ON THE LOW-VELOCITY IMPACT AND RESIDUAL COMPRESSIVE STRENGTH OF HYBRID COMPOSITE SANDWICH STRUCTURES (MT)

PARAMETER ANALYSIS AND OPTIMIZATION OF MAGNETIC ADSORPTION UNIT FOR CRAWLER WALL-CLIMBING ROBOT (MT)

EFFECTS OF SURFACE MICROMORPHOLOGY CHARACTERISTICS ON FATIGUE PERFORMANCE OF DOUBLE COLD EXPANDED HOLE

RESEARCH ON FATIGUE CRACK PROPAGATION BEHAVIOR AND LIFE PREDICTION OF WIND TURBINE GEAR

MECHANICAL SIMULATION RESEARCH ON IN SITU STEERING OF AUTOMATIC STEERING VEHICLE FOR HANDLING SAFETY VALVE BASED ON ADAMS

Related Author

No data

Related Institution

Jiangnan Aerospace Mechanical and Electrical Industry Co., Ltd.

School of Mechanical Engineering, Jiangnan University

College of Mechanical and Vehicle Engineering, Hunan University

School of Mechanical Engineering, Hebei University of Technology

Changhe Aircraft Industry (Group) Corporation Ltd.

⁰