SIMULATION OF FATIGUE CRACK INITIATION LIFE OF TC4 TITANIUM ALLOY BASED ON ITS MESOSCOPIC PROPERTIES

JIANG Ze; XU XiWu; GUO ShuXiang; WU Bin; QI Yan

doi:10.16579/j.issn.1001.9669.2021.02.025

您当前的位置：

首页 >

文章列表页 >

SIMULATION OF FATIGUE CRACK INITIATION LIFE OF TC4 TITANIUM ALLOY BASED ON ITS MESOSCOPIC PROPERTIES

更新时间：2022-09-22

- SIMULATION OF FATIGUE CRACK INITIATION LIFE OF TC4 TITANIUM ALLOY BASED ON ITS MESOSCOPIC PROPERTIES
- Journal of Mechanical Strength Vol. 43, Issue 2, Pages: 425-433(2021)
- 作者机构：
  
  1. 南京航空航天大学机械结构力学及控制国家重点实验室
  2. 沈阳飞机设计研究所
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2021.02.025
  CLC：
扫描看全文
JIANG Ze, XU XiWu, GUO ShuXiang, et al. SIMULATION OF FATIGUE CRACK INITIATION LIFE OF TC4 TITANIUM ALLOY BASED ON ITS MESOSCOPIC PROPERTIES. [J]. 43(2):425-433(2021)
DOI：

JIANG Ze, XU XiWu, GUO ShuXiang, et al. SIMULATION OF FATIGUE CRACK INITIATION LIFE OF TC4 TITANIUM ALLOY BASED ON ITS MESOSCOPIC PROPERTIES. [J]. 43(2):425-433(2021) DOI： 10.16579/j.issn.1001.9669.2021.02.025.

摘要

建立了TC4钛合金材料的疲劳裂纹萌生寿命的预测模型,并通过试验验证了此模型在预测TC4钛合金材料疲劳裂纹萌生寿命时的可行性。基于裂纹萌生的细观位错模型,采用Tanaka-Mura的开裂寿命公式,考虑了表面粗糙度,提出了分析TC4钛合金材料疲劳裂纹萌生的有限元模型,并通过实验验证仿真模型的有效性。结果表明:模型裂纹萌生形式在不同载荷水平下存在差异,高应力水平状态下,模型除了主裂纹的萌生扩展还伴有大量独立微裂纹,裂纹密度大,而在低应力水平状态下,模型存在少量独立微裂纹,裂纹密度小。

Abstract

This paper presents that the prediction model of fatigue crack initiation life of TC4 titanium alloy,and the feasibility of the model in predicting the fatigue crack initiation life of TC4 titanium alloy is verified by experiments. Based on the micro dislocation model of crack initiation and Tanaka mura’s formula of crack life,considering the surface roughness,a finite element model for fatigue crack initiation of TC4 titanium alloy is proposed,and the validity of the simulation model is verified by experiments. The results show that the crack initiation forms of the model are different under different load levels. At high stress levels,the model has a large number of independent microcracks in addition to the initiation and propagation of the main cracks,with a large crack density. At low stress levels,the model has a small number of independent microcracks,with a small crack density.

关键词

钛合金疲劳寿命裂纹萌生仿真模型细观力学

Keywords

Titanium alloyFatigue lifeCrack initiationSimulation modelMeso mechanics

references

Views

433

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

PROCESS PARAMETER MATCHING RESEARCH ON COMPOSITE STRENGTHENING OF TITANIUM ALLOY LUG STRUCTURAL

FATIGUE LIFE ANALYSIS OF PIPELINE CONSIDERING INITIAL ASSEMBLY STRESS (MT)

STUDY ON FATIGUE LIFE OF SUS304 STAINLESS STEEL SPOT WELDED JOINTS (MT)

CAE SIMULATION ANALYSIS AND RIG TEST VALIDATION RESEARCH OF AUTOMOBILE LEAFSPRING (MT)

FATIGUE LIFE PREDICTION AND EXPERIMENTAL STUDY OF ALUMINUM ALLOY WHEEL HUB CONSIDERING DAMAGE ACCUMULATION (MT)

Related Author

No data

Related Institution

School of Mechanical Engineering,Northwestern Polytechnical University

Chengdu Aircraft Industrial (Group) Co., Ltd.

Civil Aviation College, Nanjing University of Aeronautics and Astronautics

College of General Aviation and Flight, Nanjing University of Aeronautics and Astronautics

School of Mechanical Engineering, Hebei University of Technology

⁰