STRESS INTENSITY FACTORS OF TYPICAL PERIODIC CRACKS IN FIN-SHAPED SHELL UNDER BENDING

YUAN WeiJun; XIE YuJun

doi:10.16579/j.issn.1001.9669.2021.02.023

您当前的位置：

首页 >

文章列表页 >

STRESS INTENSITY FACTORS OF TYPICAL PERIODIC CRACKS IN FIN-SHAPED SHELL UNDER BENDING

更新时间：2022-09-22

- STRESS INTENSITY FACTORS OF TYPICAL PERIODIC CRACKS IN FIN-SHAPED SHELL UNDER BENDING
- Journal of Mechanical Strength Vol. 43, Issue 2, Pages: 412-417(2021)
- 作者机构：
  
  1. 中国石油大学(华东)储运与建筑工程学院
  2. 辽宁石油化工大学机械工程学院
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2021.02.023
  CLC：
扫描看全文
YUAN WeiJun, XIE YuJun. STRESS INTENSITY FACTORS OF TYPICAL PERIODIC CRACKS IN FIN-SHAPED SHELL UNDER BENDING. [J]. 43(2):412-417(2021)
DOI：

YUAN WeiJun, XIE YuJun. STRESS INTENSITY FACTORS OF TYPICAL PERIODIC CRACKS IN FIN-SHAPED SHELL UNDER BENDING. [J]. 43(2):412-417(2021) DOI： 10.16579/j.issn.1001.9669.2021.02.023.

摘要

不同载荷下含裂纹工程构件的应力强度因子是断裂分析的核心问题之一。细长的鳍形壳具有壳和梁的双重特性,在其横截面上常会出现一些典型周期性裂纹,如周期性鳍上裂纹和环向裂纹。在弯曲作用下,裂纹尖端附近会出现不同的奇异应力场。从守恒定律和初等力学出发,提出了一种简单易懂的确定应力强度因子的方法,该方法计算的应力强度因子与有限元计算结果吻合良好。

Abstract

Stress intensity factor（ SIF） for cracked engineering structures under different loading is one of the core issues of fracture analysis. A slender fin-shaped shell possesses both shell and beam characteristics,in the cross-section of which some typical periodic cracks,such as the periodic cracks on fins and circumferential cracks,may arise usually. There will be different singular stress fields next to crack tips for a cracked fin-shaped shell under bending. Based on the conservation law and the elementary mechanics,a technique to determine SIFs has been proposed in this article,which is simple and easy to understand.The SIFs calculated by using of the present method agree well with the FEM results.

关键词

守恒律应力强度因子鳍形壳裂纹有限元法

Keywords

Conservation lawStress intensity factorsFin-shaped shellCracksFinite element method

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

FRACTURE ANALYSIS OF FUNCTIONALLY GRADED MATERIALS WITH COLLINEAR CRACKS

VIBRATION MODAL CHARACTERISTICS OF THE HIGH-PRECISION RV REDUCER CONSIDERING MESH STATE

ANALYSIS THE FORMULA OF STRESS INTENSITY FACTORS FOR THE COMPACT TENSION SHEAR TEST

FINITE ELEMENT ANALYSIS AND OPTIMAL DESIGN OF A RADAR BLOCK STRUCTURE

STUDY ON THE TENSILE PROPERTIES OF ADHESIVE-RIVET HYBRID REPAIR STRUCTURE OF COMPOSITE LAMINATES

Related Author

No data

Related Institution

College of Computer and Control Engineering,Qiqihar University

College of Mechanical and Electronic Engineering,Qiqihar University

Ningbo Zhongda Leader Intelligent Transmission Co., Ltd.

Zhejiang Provincial Key Lab of Part Rolling Technology,Ningbo University

CNPC Project Management Company

⁰