ROLLER BEARING FAULT RECOGNITION METHOD BASED ON CYCLIC AUTOCORRELATION AND MULTI-DOMAIN KERNEL LIMIT LEARNING MACHINE

WANG XiaoHui; WANG GuangBing; XIANG JiaWei; HUANG Zhen; SUI GuangZhou

doi:10.16579/j.issn.1001.9669.2020.06.005

您当前的位置：

首页 >

文章列表页 >

ROLLER BEARING FAULT RECOGNITION METHOD BASED ON CYCLIC AUTOCORRELATION AND MULTI-DOMAIN KERNEL LIMIT LEARNING MACHINE

更新时间：2022-09-22

- ROLLER BEARING FAULT RECOGNITION METHOD BASED ON CYCLIC AUTOCORRELATION AND MULTI-DOMAIN KERNEL LIMIT LEARNING MACHINE
- Journal of Mechanical Strength Vol. 42, Issue 6, Pages: 1302-1309(2020)
- 作者机构：
  
  1. 岭南师范学院机电工程学院
  2. 温州大学机电工程学院
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2020.06.005
  CLC：
扫描看全文
WANG XiaoHui, WANG GuangBing, XIANG JiaWei, et al. ROLLER BEARING FAULT RECOGNITION METHOD BASED ON CYCLIC AUTOCORRELATION AND MULTI-DOMAIN KERNEL LIMIT LEARNING MACHINE. [J]. 42(6):1302-1309(2020)
DOI：

WANG XiaoHui, WANG GuangBing, XIANG JiaWei, et al. ROLLER BEARING FAULT RECOGNITION METHOD BASED ON CYCLIC AUTOCORRELATION AND MULTI-DOMAIN KERNEL LIMIT LEARNING MACHINE. [J]. 42(6):1302-1309(2020) DOI： 10.16579/j.issn.1001.9669.2020.06.005.

摘要

根据轴承信号特点将二阶循环解调信息引入到机器学习中,提出一种基于循环自相关(CAF)频域特征和时域特征(TD)相结合的多域核极限学习机(MKELM)以精确识别轴承状态。该算法针对轴承信号的二阶循环特性构建CAF函数提取样本的循环频域特征,并与样本时域特征量结合;在此同时设计多域特征向量的匹配因子融合TD与CAF特征向量;最后将融合后的CAF-TD样本特征输入到核极限学习机中进行聚类回归。主轴轴承实验结果表明:基于CAF提取的循环频域统计量能够敏感的反映信号特征,与经典分类器比较,CAF-TD多域核极限学习机可以抽取有限样本更多特征信息,获得更准确的诊断结果。

Abstract

According to characteristics of the bearing signal,the second-order cyclic demodulation information was introduced into machine learning,and a multi-domain kernel extreme learning machine（MKELM） based on the combination of cyclic autocorrelation（CAF） frequency domain features and time domain features（TD） was proposed to accurately identify the bearing status.The algorithm constructed a CAF function based on the second-order cyclic characteristics of the bearing signal to extract the cyclic frequency domain features of the samples,then combined them with the time domain feature quantities of the samples.The matching factors of multi-domain feature vectors was designed to fuse TD and CAF feature vectors; finally,the fused CAF-TD sample features was input into the kernel extreme learning machine for cluster regression.The spindle bearing experimental results show that the cyclic frequency domain statistics extracted based on CAF can sensitively reflect the signal characteristics.Compared with the classic classifier,the CAF-TD multi-domain kernel extreme learning machine can extract more feature information from limited samples and obtain more accurate diagnostic result.

关键词

轴承循环自相关核极限学习机故障识别

Keywords

BearingCyclic autocorrelationKernel extreme learning machinePattern recognition

references

Views

142

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

STUDY OF DOMAIN ADAPTIVE NETWORK AND BALANCED DYNAMIC DISTRIBUTION ADAPTIVE FAULT MIGRATION DIAGNOSIS OF BEARING UNDER VARIABLE CONDITIONS (MT)

RESEARCH ABOUT FAULT DIAGNOSIS OF BEARING BASED ON INSTRINSIC TIME SCALE DECOMPOSITION AND CONVOLUTIONAL NEURAL NETWORK

NEW METHOD FOR BEARING INTELLIGENT DIAGNOSIS BASED ON COMPRESSED SENSING AND MULTILAYER EXTREME LEARNING MACHINE

MOTOR BEARING FAULT DIAGNOSIS BASED ON RELEVANCE VECTOR MACHINE OPTIMIZE BY IMPROVED FRUIT FLY OPTIMIZATION ALGORITHM

BEARING DEGRADATION STATE IDENTIFICATION OF LCD-HILBERT RELATIVE SPECTRUM ENTROPY

Related Author

No data

Related Institution

Inner Mongolia First Machinery Group Co.Ltd.

Yunnan Jingjian Rail Transit Investment Construction Co.Ltd.

Faculty of Mechanical and Electrical Engineering, Kunming University of Science and Technology

Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering

Energy and Power Engineering Institute,University of Shanghai for Science and Technology

⁰