THE STUDY ON CALCULATION METHOD OF THE TEARING FORCE FOR A TEARING DEVICE ON AEROSTAT

YI HuiCheng; YI Jie; SONG Miao

doi:10.16579/j.issn.1001.9669.2020.05.013

您当前的位置：

首页 >

文章列表页 >

THE STUDY ON CALCULATION METHOD OF THE TEARING FORCE FOR A TEARING DEVICE ON AEROSTAT

更新时间：2022-09-22

- THE STUDY ON CALCULATION METHOD OF THE TEARING FORCE FOR A TEARING DEVICE ON AEROSTAT
- Journal of Mechanical Strength Vol. 42, Issue 5, Pages: 1099-1104(2020)
- 作者机构：
  
  1. 湖南工业职业技术学院汽车工程学院
  2. 湖南大学汽车车身先进设计制造国家重点实验室
  3. 湖南航天远望科技有限公司
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2020.05.013
  CLC：
扫描看全文
YI HuiCheng, YI Jie, SONG Miao. THE STUDY ON CALCULATION METHOD OF THE TEARING FORCE FOR A TEARING DEVICE ON AEROSTAT. [J]. 42(5):1099-1104(2020)
DOI：

YI HuiCheng, YI Jie, SONG Miao. THE STUDY ON CALCULATION METHOD OF THE TEARING FORCE FOR A TEARING DEVICE ON AEROSTAT. [J]. 42(5):1099-1104(2020) DOI： 10.16579/j.issn.1001.9669.2020.05.013.

摘要

基于线弹性断裂力学的理论基础,对一种新型浮空器撕裂装置的撕裂力计算方法进行了研究。首先通过I型和III型撕裂试验,获得薄膜材料的I型和III型临界应变能量释放率GIC和GIIIC。应用Debond和VCCT技术构建I型撕裂、III型撕裂和新型撕裂装置的有限元模型,选择Power模型作为裂纹扩展判据,并分别通过I型、III型撕裂试验结果和仿真结果匹配计算拟合出Power模型中的指数。最后,基于新型撕裂装置有限元模型和Power模型求解出撕裂力,通过物理实验验证结果的有效性,表明该计算方法确实可行。

Abstract

A method for calculating the tearing force of a new type of tearing device for aerostat was studied based on the theory of linear elastic fracture mechanics. Firstly,the critical strain energy release rates GICand GIIICof the film materials were obtained by fracture tests of type I and III. The FEA Models of the tears-I,tears-III and the tearing device were constructed by Debond and VCCT technology. The Power model was selected as the crack extension criterion,and the index in the Power model was fitted by the FEA results and test results of Type I and Type III tearing respectively. Finally,the tearing force of the tearing device was calculated based on the finite element model and the power model. The effectiveness of the results was verified by physical experiments,indicating that the calculation method of the tearing force for the new tearing device is feasible.

关键词

薄膜撕裂有限元断裂力学

Keywords

Membrane tearFEAFracture mechanics

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

EFFECT OF SLANT CRACK ON WEAKENING MOTOR SHAFT STIFFNESS

AN ANALYICAL METHOD ON STRESS INTENSITY FACTOR FOR CRACKED D-SHAPE CROSS-SECTION PIPE

STRESS INTENSITY FACTOR FOR CRACKED FLAT-ELLIPTIC CROSS-SECTION PIPE

THE CONTACT PROBLEM STUDY OF THE SELF DUMPING TRUCK DRIVING AXLE HOUSING USING RESPONSE SURFACE METHOD

RESEARCH ON FATIGUE CRACK PROPAGATION LIFE OF CASTING CRANE GIRDER UNDER IMPACT LOAD

Related Author

No data

Related Institution

School of Energy and Power Engineering,Shenyang University of Chemical Technology

College of Mechanical Engineering,Liaoning University of Petroleum and Chemical Technology

Collage of Mechanical Engineering,Liaoning University of Petroleum and Chemical Technology

College of Automobile Engineering,Guilin University of Aerospace Technology

Faculty of Mechanical Engineering,Kunming University of Science and Technology

⁰