PERFORMANCE ANALYSIS ONAIR-CONDITIONING DOME BY STAR-CCM+

JI FangFang; JIANG LiFei

doi:10.16579/j.issn.1001.9669.2020.02.038

您当前的位置：

首页 >

文章列表页 >

PERFORMANCE ANALYSIS ONAIR-CONDITIONING DOME BY STAR-CCM+

更新时间：2022-09-22

- PERFORMANCE ANALYSIS ONAIR-CONDITIONING DOME BY STAR-CCM+
- Journal of Mechanical Strength Vol. 42, Issue 2, Pages: 504-508(2020)
- 作者机构：
  
  1. 唐山师范学院
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2020.02.038
  CLC：
扫描看全文
JI FangFang, JIANG LiFei. PERFORMANCE ANALYSIS ONAIR-CONDITIONING DOME BY STAR-CCM+. [J]. 42(2):504-508(2020)
DOI：

JI FangFang, JIANG LiFei. PERFORMANCE ANALYSIS ONAIR-CONDITIONING DOME BY STAR-CCM+. [J]. 42(2):504-508(2020) DOI： 10.16579/j.issn.1001.9669.2020.02.038.

摘要

建立三种不同空调导流罩数值模拟模型,应用流体数值分析软件Star-ccm+对其气动阻力进行对比分析,结果表明迎风面和背风面均采用圆弧面结构的方案2和仅迎风面采用圆弧面结构的方案3较优。并通过与无侧风工况风洞试验数据对比,以验证模拟数据的准确性。同时通过数值模拟计算方案2和方案3进排风口的压力分布,评价不同导流罩外形对冷凝器进排风及新风进风功能的实现,为空调导流罩的设计提供依据。

Abstract

Three kinds of air conditioning shroud are analyzed by using STAR-CCM+. The results show that the scheme 2 with circular arc surface structure on both windward and the scheme 3 with circular arc surface structure only on windward side are better. The data is verified by comparing with the wind tunnel test data without cross-wind condition. The influence of different diversion hood shapes on the intake and exhaust air of condenser and fresh air intake was evaluated by calculating the pressure distribution of intake and exhaust outlets of schemes 2 and 3. It provides a basis for the design of air conditioning shroud.

关键词

STAR-CCM+阻力功能优化

Keywords

STAR-CCM+ResistanceFunctionOptimization

references

Views

122

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

UN R127 PEDESTRIAN PROTECTION ANALYSIS AND OPTIMIZATION OF THE VEHICLE

CONTACT STRESS ANALYSIS AND OPTIMIZATION OF DOUBLE SHOCK SLEEVE MOVABLE TOOTH

ANALYSIS AND OPTIMIZATION OF WORKSPACE FLEXIBILITY OF WELDING ROBOT

GRAY CORRELATION ANALYSIS OF SURFACE INTEGRITY OF ULTRASONIC-ASSISTED ROLLING GCR15 BEARING STEEL

RESEARCH ON FATIGUE TEST METHOD OF CAR BODY OF HIGH-SPEED EMU

Related Author

No data

Related Institution

Faw Haima Automobile Co.,Ltd.

Department of Industry and Information Engineering,Vocational Technology College of Hainan

School of Mechanical Engineering,Yanshan University

College of Mechanical Engineering and Automation,Liaoning University of Technology

First Tractor Co.,Ltd.

⁰