FAILURE ANALYSIS OF THE COATING OF TRANSMISSION MECHANISM BASED ON COHESIVE ZONE MODEL

WANG Ning; LIU YuanQing; WANG Bo; LI WeiTuo; SUN GuoPeng

doi:10.16579/j.issn.1001.9669.2019.05.027

您当前的位置：

首页 >

文章列表页 >

FAILURE ANALYSIS OF THE COATING OF TRANSMISSION MECHANISM BASED ON COHESIVE ZONE MODEL

更新时间：2022-09-22

- FAILURE ANALYSIS OF THE COATING OF TRANSMISSION MECHANISM BASED ON COHESIVE ZONE MODEL
- Journal of Mechanical Strength Vol. 41, Issue 5, Pages: 1188-1193(2019)
- 作者机构：
  
  1. 北京空间飞行器总体设计部
  2. 北京理工大学机械与车辆学院
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2019.05.027
  CLC：
扫描看全文
WANG Ning, LIU YuanQing, WANG Bo, et al. FAILURE ANALYSIS OF THE COATING OF TRANSMISSION MECHANISM BASED ON COHESIVE ZONE MODEL. [J]. 41(5):1188-1193(2019)
DOI：

WANG Ning, LIU YuanQing, WANG Bo, et al. FAILURE ANALYSIS OF THE COATING OF TRANSMISSION MECHANISM BASED ON COHESIVE ZONE MODEL. [J]. 41(5):1188-1193(2019) DOI： 10.16579/j.issn.1001.9669.2019.05.027.

摘要

硬质涂层具有耐磨性好,接触疲劳寿命高的优点,广泛应用于航天航空领域。然而在重载工况下,涂层基底的界面处可能会发生脱层失效,影响机械零件的可靠性。近年来涂层失效机理及增强涂层结合能力的研究逐渐受到关注。采用内聚力的理论模型,结合有限元模拟的方法,对涂层基体的界面分层失效行为进行分析。研究结果表明,基于内聚力理论模型的仿真分析结果与试验结果对比吻合程度高。在此基础上,讨论了不同因素对涂层结合能力大小的影响。增加涂层厚度和提高涂层弹性模量均可以提高界面的结合能力,增加零件的承载范围。

Abstract

Hard coatings has the advantages of good wear resistance and high contact fatigue life which has been widely used in aerospace and aviation fields. However, the coating/subtrate interference will occur delamination failure under the heavy load, and the reliability of machine parts has been affected. Recently, study on the coatings failure mechanisms and the bonding ability of coatings is greatly focused on. The article adopting cohesive zone model combined with FEM analysis the delamination failure of the coating/subtrate interference. The results show that the simulation results based on the cohesive zone model coincides with the experimen results. On this foundation, the effects of different factors on the adhesion strength of coatings are studied. The bonding strength of coatings has been greatly increased by increasing the thickness and elastic modulus of coatings, and the carrying capacity has greatly improved.

关键词

涂层失效内聚力模型结合强度有限元

Keywords

Coating failureCohesive zone modelAdhesive strengthFEM

references

Views

236

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

STRESSES ANALYSIS AND MULTI-AXIAL FATIGUE EVALUATION OF RESILIENT WHEEL

INVERSION OF PARAMETERS FOR COMPOSITE INTERLAYER COHESIVE ZONE MODEL BY USING ARTIFICIAL BEE COLONY ALGORITHM

DAMAGE EXPANSION OF STIFFENED PANEL WITH PREFABRICATED DEBONDING

EFFECT OF BRAKE THERMAL STRESS ON UNIAXIAL FATIGUE OF RAILWAY WHEEL PLATE

STEADY-STATE TEMPERATURE FIELD AND STRESS FIELD ANALYSIS OF AUTOCLAVE TOOTH-LOCKED QUICK OPENING STRUCTURE

Related Author

No data

Related Institution

Technology Center,Ma’anshan Iron ＆ Steel Co.,Ltd.

Baowu Group Masteel Rail Transit Materials Technology Company Limited

Shanghai Key Laboratory of Spacecraft Mechanism

State Key Laboratory of Mechanics and Control for Mechanical Structures,Nanjing University of Aeronautics and Astronautics

Aircraft Strength Research Institute of China,AVIC

⁰