SIMULATION AND EXPERIMENTAL STUDY ON THE TURNING MOTION SNAKING CONVEYOR BASED ON MATLAB

ZHANG DongSheng; LI Yan; WANG JinCheng; YU HaiYang; ZHAO XiBei

doi:10.16579/j.issn.1001.9669.2019.05.017

您当前的位置：

首页 >

文章列表页 >

SIMULATION AND EXPERIMENTAL STUDY ON THE TURNING MOTION SNAKING CONVEYOR BASED ON MATLAB

更新时间：2022-09-22

- SIMULATION AND EXPERIMENTAL STUDY ON THE TURNING MOTION SNAKING CONVEYOR BASED ON MATLAB
- Journal of Mechanical Strength Vol. 41, Issue 5, Pages: 1118-1124(2019)
- 作者机构：
  
  1. 山东交通学院工程机械学院
  2. 阜新市产业技术创新推广中心
  3. 辽宁工程技术大学机械工程学院
  4. 国网辽宁电力有限公司抚顺县供电公司
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2019.05.017
  CLC：
扫描看全文
ZHANG DongSheng, LI Yan, WANG JinCheng, et al. SIMULATION AND EXPERIMENTAL STUDY ON THE TURNING MOTION SNAKING CONVEYOR BASED ON MATLAB. [J]. 41(5):1118-1124(2019)
DOI：

ZHANG DongSheng, LI Yan, WANG JinCheng, et al. SIMULATION AND EXPERIMENTAL STUDY ON THE TURNING MOTION SNAKING CONVEYOR BASED ON MATLAB. [J]. 41(5):1118-1124(2019) DOI： 10.16579/j.issn.1001.9669.2019.05.017.

摘要

以蛇行输送机为研究对象,基于Serpenoid曲线对蛇行输送机运动形态进行描述,并对其进行离散化设计和时域扩展,运用Matlab软件找到了蛇行输送机转弯运动时的最佳控制参数区间。对蛇形输送机蜿蜒运动、向左转弯运动、向右转弯运动三种工况进行了仿真分析,得到不同工况下各相邻机架间转向角度的变化规律。最后,根据所得的机架间转向角度对蛇行输送机实车进行转弯实验,验证了转弯运动控制参数的有效性及合理性。

Abstract

The hunting conveyor as research object, the hunting conveyor motion based on Serpenoid curve shape description, and carries on the discrete design and time domain expansion, using MATLAB software to find the optimal parameters of interval turning movement of the conveyor system. The simulation analysis is carried out on three kinds of working conditions, such as serpentine motion, left turn and right turn, and the variation of the steering angle is obtained under different working conditions. Finally, according to the frame turning experiment of vehicle hunting conveyor angle, verify the validity and rationality of the turning motion control parameters.

关键词

Serpenoid曲线离散化设计时域扩展Matlab转弯运动

Keywords

Serpenoid curveDiscrete designTime domain expansionMATLABTurn movement

references

Views

194

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

REVERSE REALIZATION OF PITCH CURVE ON CONJUGATE CAM WITH HIGH SPEED BEATING-UP

STUDY ON DYNAMIC BEHAVIOR OF A NEW STEPPING-TYPE EXCAVATION,SUPPORT AND ANCHOR COMBINED UNIT AND ITS VARIABLE TEMPERATURE ENVIRONMENT

THE INFLUENCE OF THE DRIVING SPEED OF THE TRAVELING MECHANISM OF THE COAL MINING MACHINE ON THE RANDOM LOAD OF THE ROLLER

PARAMETER OPTIMIZATION OF SPIRAL DRILL PIPE FOR ANCHOR RECYCLING EQUIPMENT BASED ON PARTICLE SWARM OPTIMIZATION ALGORITHM

AIR SPRING’S PERFORMANCE IN HEIGHT ADJUSTING FOR BICYCLE SADDLE

Related Author

No data

Related Institution

College of Mechanical Engineering,Xijing University

College of Mechanical Engineering,Liaoning Technical University

College of Optoelectronic Information,Changchun University of Science and Technology

China National Coal Association,Dynamic Research for High-end Complete Integrated Coal Mining Equipmentand Big Data Analysis Center

Mechanical Engineering College,Liaoning Technical University

⁰