DESIGN AND THE ANALYSIS OF SIX-DEGREE-OF-FREEDOM ADJUSTING MECHANISM WITH HIGH ACCURACY AND STIFFNESS

HE Lei; HAN HasiaoQier; HAN ChunYang; HE Shuai; CHEN LiHeng

doi:10.16579/j.issn.1001.9669.2019.03.026

您当前的位置：

首页 >

文章列表页 >

DESIGN AND THE ANALYSIS OF SIX-DEGREE-OF-FREEDOM ADJUSTING MECHANISM WITH HIGH ACCURACY AND STIFFNESS

更新时间：2022-09-22

- DESIGN AND THE ANALYSIS OF SIX-DEGREE-OF-FREEDOM ADJUSTING MECHANISM WITH HIGH ACCURACY AND STIFFNESS
- Journal of Mechanical Strength Vol. 41, Issue 3, Pages: 666-672(2019)
- 作者机构：
  
  1. 中国科学院长春光学精密机械与物理研究所
  2. 中国科学院大学研究生院
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2019.03.026
  CLC：
扫描看全文
HE Lei, HAN HasiaoQier, HAN ChunYang, et al. DESIGN AND THE ANALYSIS OF SIX-DEGREE-OF-FREEDOM ADJUSTING MECHANISM WITH HIGH ACCURACY AND STIFFNESS. [J]. 41(3):666-672(2019)
DOI：

HE Lei, HAN HasiaoQier, HAN ChunYang, et al. DESIGN AND THE ANALYSIS OF SIX-DEGREE-OF-FREEDOM ADJUSTING MECHANISM WITH HIGH ACCURACY AND STIFFNESS. [J]. 41(3):666-672(2019) DOI： 10.16579/j.issn.1001.9669.2019.03.026.

摘要

设计一种基于Stewart构型的具有高精度和高刚度的六自由度精密调整机构。首先,对调整机构进行构型设计并作了运动学分析;接着,建立了误差模型并对构型进行了精度分析,包括精度分配及模特卡洛模拟法验证;之后,根据理论分析结果,对调整机构进行结构设计,主要包括单足位移促动器的设计和偏置铰链的设计;最后,对调整机构进行了刚度分析。本文的分析结果为此六自由度调整机构的重复定位精度为X、Y向±2μm,Z向±0.54μm,R,x,R,y,R,z,方向±6.13μrad,横向振动基频为104.3 Hz,轴向刚度为61.3 N/μm。分析结果显示此六自由度精密调整机构满足设计要求,验证了调整机构结构设计的合理性。

Abstract

A precision adjusting mechanism of six-degree-of-freedom（SDOF）based on Stewart structure with high accuracy and high stiffness is designed in this paper. Firstly, the configuration of adjusting mechanism was designed and the kinematics analysis was conducted; Then, the error model was established and the precision of the configuration of parallel platform was analyzed. After that, the structure of adjusting mechanism was designed according to the theoretical analysis results, including the single displacement actuator and the offset hinge; Finally, the stiffness of the adjusting mechanism was analyzed. This article obtaining the analysis results that the repeatability of the SDOF adjusting mechanism were ±2 m in X and Y direction,±0.54 m in Z direction, ±6.13 rad in Rx, Ry, Rz direction, and the fundamental frequency of the transverse vibration was 104.3 Hz and the axial stiffness was 61.3 N/μm. The analysis results showed that the SDOF precision adjusting mechanism fulfilled the design requirements, and the rationality for structure design of adjustment mechanism was verified.

关键词

Stewart平台调整机构蒙特卡洛模拟刚度分析

Keywords

Stewart platformAdjusting mechanismMonte Carlo simulationStiffness analysis

references

Views

327

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

STATIC AND DYNAMIC CHARACTERISTICS ANALYSIS AND OPTIMIZATION OF ELECTRIC WHEEL DUMP TRUCK FRAME

Related Author

No data

Related Institution

Department of Mechanical Engineering,Hunan University of Technology

State Key Laboratory of Advanced Design and Manufacture for Vehicle Body,Hunan University

CSR Zhuzhou Electric Motor Co.Ltd.

⁰