REVIEW OF MICRO-MILLING TECHNOLOGY

TIAN Lu; HAN XuZhao; GAO Feng; HAN Chuang

doi:10.16579/j.issn.1001.9669.2019.03.019

您当前的位置：

首页 >

文章列表页 >

REVIEW OF MICRO-MILLING TECHNOLOGY

更新时间：2022-09-22

- REVIEW OF MICRO-MILLING TECHNOLOGY
- Journal of Mechanical Strength Vol. 41, Issue 3, Pages: 618-624(2019)
- 作者机构：
  
  1. 西安理工大学机械与精密仪器工程学院
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2019.03.019
  CLC：
扫描看全文
TIAN Lu, HAN XuZhao, GAO Feng, et al. REVIEW OF MICRO-MILLING TECHNOLOGY. [J]. 41(3):618-624(2019)
DOI：

TIAN Lu, HAN XuZhao, GAO Feng, et al. REVIEW OF MICRO-MILLING TECHNOLOGY. [J]. 41(3):618-624(2019) DOI： 10.16579/j.issn.1001.9669.2019.03.019.

摘要

微细铣削可以加工三维自由曲面及复杂零件,其应用前景日益广阔。然而由于刀具尺寸及加工参数的急剧减小,微细铣削表现出显著不同于传统铣削的切削特性,因此近年来研究人员对微细铣削技术进行了广泛研究。微细铣削的加工过程复杂,涉及到许多方面,综述国内外在微细铣削方面的研究,总结了微细铣削加工过程中最小切削厚度、切削力、表面粗糙度、刀具磨损及其他方面研究的最新进展。探讨了微细铣削所研究的各方面的发展趋势,并对其应用前景进行了初步讨论。

Abstract

Micro-milling can fabricate 3 D free-form surface and complex components and has a promising prospect. However, due to sharp decreases of the tool scale and machining parameters, micro-milling process shows remarkable differences from traditional milling, thus researchers conduct broad studies on micro-milling technology recent years. The process of micro-milling is complicated and involves many aspects, the domestic and overseas researches in micro-milling are summed up in this paper, the development of minimum chip thickness, cutting force, surface roughness, tool wear, and other aspects of researches are summarized. The development trend of micro-milling and the application prospect are discussed.

关键词

微细铣削最小切削厚度切削力表面粗糙度刀具磨损

Keywords

Micro-millingMinimum chip thicknessCutting forceSurface roughnessTool wear

references

Views

732

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

STUDIED ON AN IMPROVED CONSTITUTIVE MODEL AND SIMULATION FOR MILLING MEDICAL Ti-xNb-2Fe ALLOY

STUDY ON THE EFFECT OF ROLLING STRENGTHENING ON THE SURFACE INTEGRITY OF 45 STEEL THREAD ROOT

DETERMINATION OF MACHINING PARAMETERS OF COLD ROLL-BEATING SPLINE SURFACE ROUGHNESS

EFFECT OF SURFACE ROUGHNESS ON FATIGUE PROPERTY OF TC4 TITANIUM ALLOY BY SELECTIVE LASER MELTING

EFFECT OF COLD ROLL-BEATING SPLINE FORMING PARAMETERS ON SURFACE ROUGHNESS

Related Author

No data

Related Institution

College of Mechanical Engineering, University of Shanghai for Science and Technology

Henan Province Industrial Technology Research Institute of Resources and Materials,Zhengzhou University

School of Mechanical and Power Engineering,Zhengzhou University

Collaborative Innovation Center of Machinery Equipment Advanced Manufacturing of Henan Province

School of Mechatronics Engineering,Henan University of Science and Technology

⁰