THE STRUCTURAL DESIGN OF BOSS CHAIR FOOTREST AND IT’S STUDYING ABOUT MECHANICAL PROPERTY

ZENG Jian; QIN BaoRong; ZHANG DongDong; XIE Wei; WANG ZhengXing; WANG Xing

doi:10.16579/j.issn.1001.9669.2018.03.040

您当前的位置：

首页 >

文章列表页 >

THE STRUCTURAL DESIGN OF BOSS CHAIR FOOTREST AND IT’S STUDYING ABOUT MECHANICAL PROPERTY

更新时间：2022-09-22

- THE STRUCTURAL DESIGN OF BOSS CHAIR FOOTREST AND IT’S STUDYING ABOUT MECHANICAL PROPERTY
- Journal of Mechanical Strength Vol. 40, Issue 3, Pages: 754-758(2018)
- 作者机构：
  
  1. 浙江工业大学浙江省特种装备制造与先进加工技术重点实验室
  2. 浙江恒林椅业股份有限公司
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2018.03.040
  CLC：
扫描看全文
ZENG Jian, QIN BaoRong, ZHANG DongDong, et al. THE STRUCTURAL DESIGN OF BOSS CHAIR FOOTREST AND IT’S STUDYING ABOUT MECHANICAL PROPERTY. [J]. 40(3):754-758(2018)
DOI：

ZENG Jian, QIN BaoRong, ZHANG DongDong, et al. THE STRUCTURAL DESIGN OF BOSS CHAIR FOOTREST AND IT’S STUDYING ABOUT MECHANICAL PROPERTY. [J]. 40(3):754-758(2018) DOI： 10.16579/j.issn.1001.9669.2018.03.040.

摘要

针对客户需求,依据人机工程学原理设计了一款总裁椅用搁脚机构。运用Adams软件对建立的三维模型进行运动学仿真,验证了机构的运动特性,基于AWE环境对机构进行有限元分析,校核了结构的强度和刚度,在实物样机的基础上进行力学性能测试。结果表明,设计的搁脚机构满足人机尺寸要求和运动平稳性要求,结构的静强度、疲劳强度和刚度符合BIFMA测试标准,试验研究结果与有限元分析结果相符合。

Abstract

According to customers’ needs,Based on ergonomics principle,a Boss Chair footrest was designed. Using Adams software to take kinematics simulation,which has verified the movement characteristics of the organization. Based on finite element analysis AWE environment on the organization,To check the strength and stiffness of the structure. On the basis of the physical prototype,to take mechanical properties test. It turned out that the footrest meet requirements of ergonomics size and movement stability,static strength,fatigue strength and stiffness of the structure conform to the BIFMA test standard. The testing results coincided with the finite element analysis.

关键词

人机工程学搁脚机构运动学仿真有限元分析样机测试

Keywords

ErgonomicsFootrestKinematics simulationFinite element analysisPrototype test

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

DESIGN AND THE MECHANICAL PROPERTIES STUDY OF A SWING-STYLE OFFICE LOUNGE CHAIR

DESIGN AND SIMULATION VERIFICATION OF METRO ENERGY ABSORBED STRUCTURE BASED ON ASME RT-2 STANDARD (MT)

EXPERIMENTAL STUDY ON FRETTING FATIGUE OF 2024 ALUMINUM ALLOY UNDER ALTERNATING NORMAL LOAD (MT)

CREEP DAMAGE CONSTITUTIVE MODEL OF FE-CR-NI BASED AUSTENITIC STAINLESS STEEL

RESEARCH ON FATIGUE CRACK PROPAGATION BEHAVIOR AND LIFE PREDICTION OF WIND TURBINE GEAR

Related Author

No data

Related Institution

Zhejang University of Technology,Key Laboratory of Special Purpose Equipment and Advanced Manufacturing Technology,Ministry of Education

Carbody Platform Department,CRRC Changchun

School of Mechanical-Electrical and Vehicle Engineering, Beijing University of Civil Engineering and Architecture

Beijing Key Laboratory of Performance Guarantee on Urban Rail Transit Vehicles

School of Mechanical Engineering,Inner Mongolia University of Science and Technology

⁰