DYNAMIC MECHANICAL BEHAVIOR AND CONSTITUTIVE MODEL OF FV520B MARTENSITIC PRECIPITATION-HARDENING STEEL

WU Liang; HU YiSen; JI Xiang; WANG Gang

doi:10.16579/j.issn.1001.9669.2018.03.013

您当前的位置：

首页 >

文章列表页 >

DYNAMIC MECHANICAL BEHAVIOR AND CONSTITUTIVE MODEL OF FV520B MARTENSITIC PRECIPITATION-HARDENING STEEL

更新时间：2022-09-22

- DYNAMIC MECHANICAL BEHAVIOR AND CONSTITUTIVE MODEL OF FV520B MARTENSITIC PRECIPITATION-HARDENING STEEL
- Journal of Mechanical Strength Vol. 40, Issue 3, Pages: 584-588(2018)
- 作者机构：
  
  1. 中国船舶重工集团公司第七二五研究所
  2. 清华大学机械工程系
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2018.03.013
  CLC：
扫描看全文
WU Liang, HU YiSen, JI Xiang, et al. DYNAMIC MECHANICAL BEHAVIOR AND CONSTITUTIVE MODEL OF FV520B MARTENSITIC PRECIPITATION-HARDENING STEEL. [J]. 40(3):584-588(2018)
DOI：

WU Liang, HU YiSen, JI Xiang, et al. DYNAMIC MECHANICAL BEHAVIOR AND CONSTITUTIVE MODEL OF FV520B MARTENSITIC PRECIPITATION-HARDENING STEEL. [J]. 40(3):584-588(2018) DOI： 10.16579/j.issn.1001.9669.2018.03.013.

摘要

为了研究马氏体沉淀硬化不锈钢FV520B的动态力学行为,采用Instron液压试验机和分离式霍普金森压杆试验装置,在不同温度(分别为20℃、100℃、300℃、500℃、700℃)和不同应变率(分别为0.001 s,-1,、1 000 s,-1,、3 000 s,-1,、6 000 s,-1,)条件下对圆柱形试样进行了准静态和动态加载试验。基于Jonson-Cook和Power-Law两种本构模型对试验数据进行了拟合。试验结果表明,材料的屈服强度与流动应力随着温度升高而降低;在温度一定时,随着应变和应变率的增大,材料的流动应力增高,具有典型的温度软化、应变强化和应变率强化特性。研究表明,相比经典JonsonCook模型,Power-Law模型与试验结果吻合的更好,更适用于FV520B材料。

Abstract

In order to obtain the dynamic mechanical properties of FV520 B martensitic precipitation-hardening steel,quasistatic and dynamic compression test of cylinder samples with different temperatures（ 20 ℃,100 ℃,300 ℃,500 ℃,700 ℃respectively） and strain rates( 0. 001 s,-1,1000 s,-1,3000 s,-1,6000 s,-1, respectively) were performed by Instron hydraulic testing machine and Split Hopkinson Pressure Bar（ SHPB）. Based on the Jonson-Cook and Power-Law constitutive model,the constitutive relation of material was fitted by the experiment results. The experiment results show that the yield stress and flow stress of material increase with the decrease of temperature. As the strain and strain rates increased,the yield stress increase at a certain temperature. The strain hardening effect,strain rate hardening effect and temperature effect were analyzed in this paper.It also can obtain that Power-Law model is more suited for FV520 B than Jonson-Cook model. The Power-Law constitutive model agrees well with the experimental results.

关键词

FV520B动态力学性能本构模型温度应变率

Keywords

FV520BDynamic mechanical propertiesConstitutive modelTemperatureStrain rate

references

Views

242

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

STUDIED ON AN IMPROVED CONSTITUTIVE MODEL AND SIMULATION FOR MILLING MEDICAL Ti-xNb-2Fe ALLOY

EXPERIMENTAL RESEARCH ON FAILURE OF COMPOSITE SANDWICH π-JOINT

THE VISCOELASTIC MODEL OF STEEL WIRE ROPE RUBBER CONVEYOR BELT AND THE ANALYSIS OF DEPRESSION RESISTANCE UNDER THE INFLUENCE OF TEMPERATURE

STUDY ON CONSTITUTIVE MODEL AND MECHANICAL PROPERTIES OF 7003 ALUMINUM ALLOY

NUMERICAL SIMULATION OF SHPB DYNAMIC COMPRESSION TEST OF CONCRETE

Related Author

No data

Related Institution

College of Mechanical Engineering, University of Shanghai for Science and Technology

Aeronautics Science and Technology Key Laboratory of Full Scale Aircraft Structure and Fatigue,Aircraft Strength Research Institute of China

AVIC Chengdu Aircraft Design and Research Institute

Liaoning Technical University

State Key Laboratory of Mechanical Transmission,Chongqing University

⁰