DESIGN,ANALYSIS AND SIMULATION OF A NOVEL QUASI-ZERO STIFFNESS VIBRATION ISOLATION SYSTEM

LAN Shuang; YANG XiaoXiang

doi:10.16579/j.issn.1001.9669.2018.03.002

您当前的位置：

首页 >

文章列表页 >

DESIGN,ANALYSIS AND SIMULATION OF A NOVEL QUASI-ZERO STIFFNESS VIBRATION ISOLATION SYSTEM

更新时间：2022-09-22

- DESIGN,ANALYSIS AND SIMULATION OF A NOVEL QUASI-ZERO STIFFNESS VIBRATION ISOLATION SYSTEM
- Journal of Mechanical Strength Vol. 40, Issue 3, Pages: 515-521(2018)
- 作者机构：
  
  1. 福州大学机械工程及自动化学院
  2. 泉州师范学院
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2018.03.002
  CLC：
扫描看全文
LAN Shuang, YANG XiaoXiang. DESIGN,ANALYSIS AND SIMULATION OF A NOVEL QUASI-ZERO STIFFNESS VIBRATION ISOLATION SYSTEM. [J]. 40(3):515-521(2018)
DOI：

LAN Shuang, YANG XiaoXiang. DESIGN,ANALYSIS AND SIMULATION OF A NOVEL QUASI-ZERO STIFFNESS VIBRATION ISOLATION SYSTEM. [J]. 40(3):515-521(2018) DOI： 10.16579/j.issn.1001.9669.2018.03.002.

摘要

采用拉伸弹簧组成的负刚度机构与正刚度线性弹簧并联,设计出一种新型的拉伸式准零刚度隔振系统,可用于隔离低频或超低频振动。建立该系统的静力学模型,得到系统具有准零刚度特性时所需满足的条件;与一种压缩式隔振系统的力-位移曲线进行对比;分析垂向弹簧的调节对系统的影响;建立该系统在简谐位移激励下的非线性动力学方程,利用谐波平衡法求得系统的近似响应;与压缩式隔振系统的位移传递率曲线进行对比;探索系统各主要参数对响应的影响;建立Adams动力学模型,通过仿真结果来证明静力学模型的正确性,并模拟基座激励振动,证明了拉伸式准零刚度系统在低频或超低频隔振中的性能远优于线性系统。

Abstract

Combining a negative stiffness mechanism composed of tension spring with a linear positive stiffness spring in parallel,a novel quasi-zero stiffness vibration isolation systemwas designed which can be used to isolate low or ultra-low vibration. The static model of the system was established and the condition of quasi-zero stiffness characteristics was obtained.The fore-displacement curves of the tension-type isolator and a compression-type isolator were compared. The effect of adjustment of vertical spring in the system was analyzed. The dynamic equation was established when the system was excited by a harmonic amplitude on the displacement and the equation was solved by using Harmonic Balance method. The displacement transmissibility curves of the tension-type and the compression-type isolators were also compared. The effect of the main parameters on response of the system was explored. ADAMS model was established and the static model was proved to be correct. The vibration simulation results prove that the quasi-zero stiffness system has greater advantage than linear system in low or ultra-low vibration isolation.

关键词

拉伸式准零刚度系统低频隔振传递率Adams仿真

Keywords

Tension-type quasi-zero stiffnesssystemLow vibration isolationTransmissibilityAdams Simulation

references

Views

498

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

FLEXIBLE DYNAMICS ANALYSIS OF SLEY SYSTEM FOR HIGH-SPEED RAPIER LOOM BASED ON FINITE ELEMENT METHOD

MECHANISM KINEMATIC ANALYSIS AND BALANCE SPRING OPTIMIZATION DESIGN OF 800 kV AC DISCONNECTOR

DYNAMIC ANALYSIS AND SIMULATION OF FULL ROTARY BUILT-IN STEERING DRILLING TOOLS

MODIFICATION STUDY OF TWO TEETH DIFFERENCE SWING ROD MOVABLE TOOTH DRIVE BASED ON STATE OF TOOTH CONTACT

ROBOT TRAJECTORY PLANNING BASED ON 4-1-4 SPLINE INTERPOLATION WITH THE SAME INTERPOLATION TIME

Related Author

No data

Related Institution

School of Mechanical Engineering,Tianjin Polytechnic University

Tianjin Key Laboratory of Advanced Mechatronics Equipment Technology

Pinggao Group Co.,Ltd.

Henan Pinggao Elcetric Co.,Ltd.

School of Mechanical and Power Engineering,Zhengzhou University

⁰