RESEARCH ON NUMERICAL ANALYSIS OF ELECTROMAGNETIC FIELD BASED ON A NEW ACTIVE NUMERICAL ALGORITHM

NIE Xin; LI YongLi; HE ZhiCheng

doi:10.16579/j.issn.1001.9669.2018.02.020

您当前的位置：

首页 >

文章列表页 >

RESEARCH ON NUMERICAL ANALYSIS OF ELECTROMAGNETIC FIELD BASED ON A NEW ACTIVE NUMERICAL ALGORITHM

更新时间：2022-09-22

- RESEARCH ON NUMERICAL ANALYSIS OF ELECTROMAGNETIC FIELD BASED ON A NEW ACTIVE NUMERICAL ALGORITHM
- Journal of Mechanical Strength Vol. 40, Issue 2, Pages: 378-383(2018)
- 作者机构：
  
  1. 湖南大学汽车车身先进设计制造国家重点实验室
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2018.02.020
  CLC：
扫描看全文
NIE Xin, LI YongLi, HE ZhiCheng. RESEARCH ON NUMERICAL ANALYSIS OF ELECTROMAGNETIC FIELD BASED ON A NEW ACTIVE NUMERICAL ALGORITHM. [J]. 40(2):378-383(2018)
DOI：

NIE Xin, LI YongLi, HE ZhiCheng. RESEARCH ON NUMERICAL ANALYSIS OF ELECTROMAGNETIC FIELD BASED ON A NEW ACTIVE NUMERICAL ALGORITHM. [J]. 40(2):378-383(2018) DOI： 10.16579/j.issn.1001.9669.2018.02.020.

摘要

在电磁场的数值计算中,一般采用有限元法进行模拟仿真。但由于传统有限元法系统解的精度受剖分单元数目以及计算阶数复杂程度的影响,使得有限元法的计算效率并不高。为了提高电磁场数值计算效率,在有限元法中引入梯度光滑操作,提出一种新型基于边的光滑有限元算法,利用Matlab对长直接地金属槽和电动车整车二维电/磁场两个算例进行编程仿真分析。结果表明梯度光滑操作能使离散系统更接近连续系统,计算精度和计算效率都得到明显的提高。

Abstract

The FEM has been widely adopted to solve electromagnetic field problems. The accuracy of FEM is highly effected by the number of system units and the complexity of computational order,leading to low computational efficiency. In order to improve the computational efficiency of FEM,gradient smooth is introduced into numerical calculation of electromagnetic field,then a new method of ES-FEM is proposed. The electromagnetic field of infinite straight grounding slot and Electric Vehicle are simulated with MATLAB. The results shows that smooth gradient operation makes the discrete system closer to the continuous system,increasing the accuracy and the efficiency of FEM.

关键词

基于边的光滑有限元法梯度光滑电动车电磁场数值计算

Keywords

Edge-based smoothed finite element method（ES-FEM）Gradient smoothElectric vehicle electromagnetic fieldNumerical calculation

references

Views

258

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

ANALYSIS OF THE EFFECT OF LIQUID VISCOSITY ON ROLLING CONTACT FATIGUE CRACK PROPAGATION OF RAIL

LONGITUDINAL VIBRATION CHARACTERISTICS OF DRILL BIT IN DRILLING RIG INFLUENCE ON WEAR AND MECHANISM OF TOOTH WHEEL END

SIMULATION FOR THE PRESSURE LOSS OF AUTOMOTIVE EXHAUST MUFFLER

Related Author

No data

Related Institution

Tribology Research Institute,State Key Laboratory of Traction Power,Southwest Jiaotong University

College of Mechanical Engineering,Liaoning Technical University

School of Information,Ningbo City College of Vocational Technology

⁰