FATIGUE LIFE PREDICTION OF BOX GIRDER OF BRIDGE BASED ON EQUIVALENT CRACK APPROACH

LUO YouHong; WU Xiao; DING ZhengNan; FENG XiaoHua

doi:10.16579/j.issn.1001.9669.2018.01.034

您当前的位置：

首页 >

文章列表页 >

FATIGUE LIFE PREDICTION OF BOX GIRDER OF BRIDGE BASED ON EQUIVALENT CRACK APPROACH

更新时间：2022-09-22

- FATIGUE LIFE PREDICTION OF BOX GIRDER OF BRIDGE BASED ON EQUIVALENT CRACK APPROACH
- Journal of Mechanical Strength Vol. 40, Issue 1, Pages: 200-204(2018)
- 作者机构：
  
  1. 西南交通大学机械工程学院
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2018.01.034
  CLC：
扫描看全文
LUO YouHong, WU Xiao, DING ZhengNan, et al. FATIGUE LIFE PREDICTION OF BOX GIRDER OF BRIDGE BASED ON EQUIVALENT CRACK APPROACH. [J]. 40(1):200-204(2018)
DOI：

LUO YouHong, WU Xiao, DING ZhengNan, et al. FATIGUE LIFE PREDICTION OF BOX GIRDER OF BRIDGE BASED ON EQUIVALENT CRACK APPROACH. [J]. 40(1):200-204(2018) DOI： 10.16579/j.issn.1001.9669.2018.01.034.

摘要

针对起重机箱形梁结构及其受力情况复杂的特点,提出了一种以疲劳试验数据为基础的等效裂纹法来估算疲劳寿命。疲劳试验数据能够很好反映结构疲劳危险处的应力集中影响。箱形梁疲劳危险点处的应力集中影响可以大概等效为一未焊接平板上具有一等效裂纹,并用Paris公式计算等效裂纹的扩展寿命。通过将该方法的估算结果与文献中的疲劳试验结果进行对比分析,文中方法对于常幅载荷作用下的疲劳寿命估算是有效可行的,而对于变幅载荷作用下的疲劳寿命估算还有待进一步研究。

Abstract

According to the characteristics of structure of the crane box girder and its complex stress condition,an equivalent crack approach based on fatigue test data is presented to estimate the fatigue life. The fatigue test data can be well in reflecting the effect of stress concentration on fatigue risk points. The stress concentration effects at the fatigue dangerous location can be approximately equivalent to having a crack in an unwelded plate. Using paris law calculate the equivalent crack propagation. By comparing estimation results with fatigue test results in the literature,the proposed method is effective and feasible to estimate the fatigue life under constant amplitude loading,but it needs to be further researched for estimation fatigue life under variable amplitude loading.

关键词

起重机箱形梁等效裂纹疲劳寿命估算

Keywords

CraneBox girderEquivalent crackFatigue lifeEstimation

references

Views

182

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

STUDY ON PROBABILISTIC SAFETY ASSESSMENT FOR BOX GIRDER OF BRIDGE AND GANTRY CRANE

RESEARCH ON SAFETY ASSESSMENT METHOD FOR BOX GIRDER OF BRIDGE AND GANTRY CRANE

FATIGUE LIFE ANALYSIS OF PIPELINE CONSIDERING INITIAL ASSEMBLY STRESS (MT)

STUDY ON FATIGUE LIFE OF SUS304 STAINLESS STEEL SPOT WELDED JOINTS (MT)

CAE SIMULATION ANALYSIS AND RIG TEST VALIDATION RESEARCH OF AUTOMOBILE LEAFSPRING (MT)

Related Author

No data

Related Institution

Chengdu Aircraft Industrial (Group) Co., Ltd.

Civil Aviation College, Nanjing University of Aeronautics and Astronautics

College of General Aviation and Flight, Nanjing University of Aeronautics and Astronautics

School of Mechanical Engineering, Hebei University of Technology

Qinhuangdao Tobacco Machinery Co., Ltd.

⁰