SIMULATION STUDY ON AFFECT FACTORS OF WORKOVER STRING BUCKLING IN HORIZONTAL WELL

LIN Wei; DONG ZongZheng; ZHANG LiMin; ZHANG JianZhong; WANG HongJun

doi:10.16579/j.issn.1001.9669.2017.05.043

您当前的位置：

首页 >

文章列表页 >

SIMULATION STUDY ON AFFECT FACTORS OF WORKOVER STRING BUCKLING IN HORIZONTAL WELL

更新时间：2022-09-22

- SIMULATION STUDY ON AFFECT FACTORS OF WORKOVER STRING BUCKLING IN HORIZONTAL WELL
- Journal of Mechanical Strength Vol. 39, Issue 5, Pages: 1245-1250(2017)
- 作者机构：
  
  1. 西南石油大学机电工程学院
  2. 中石油冀东油田分公司钻采工艺研究院
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2017.05.043
  CLC：
扫描看全文
LIN Wei, DONG ZongZheng, ZHANG LiMin, et al. SIMULATION STUDY ON AFFECT FACTORS OF WORKOVER STRING BUCKLING IN HORIZONTAL WELL. [J]. 39(5):1245-1250(2017)
DOI：

LIN Wei, DONG ZongZheng, ZHANG LiMin, et al. SIMULATION STUDY ON AFFECT FACTORS OF WORKOVER STRING BUCKLING IN HORIZONTAL WELL. [J]. 39(5):1245-1250(2017) DOI： 10.16579/j.issn.1001.9669.2017.05.043.

摘要

准确了解修井作业过程中井底钻压及管柱屈曲变化规律对于高效、安全修井作业具有重要的意义。根据数值仿真原理及修井管柱受力特性,建立了修井作业管柱有限元模型,分析了管柱在井筒中的受力情况,模型计算结果与现场实验数据吻合较好。通过了水平作业管柱有限元模型,对影响水平井管柱屈曲临界载荷的摩擦因数和环空间隙等因素进行了分析。研究结果表明:摩擦因数越大其正弦和螺旋屈曲临界载荷都随着增大,且螺旋屈曲临界载荷对摩擦因数更敏感;环空间隙变大,会导致管柱的屈曲载荷减小,且当环空间隙大于35 mm时,管柱的螺旋屈曲临界载荷小于正弦屈曲临界载荷。

Abstract

Understanding the WOB and the law of tubular buckling is significant to handle workover operation efficiently and safely. Based on the simulation theory and the characteristics of workover string dynamics,a finite element model is established for the workover string. Then,the tubular in the wellbore is simulated by the model,and the simulation result is highly coincide with the experiment result. The strings in horizontal well is built,and the critical buckling load is analyzed in different friction coefficient and different annular clearance. The results show that: the sinusoidal buckling load and helical buckling load will increase with the friction coefficient,and the helical buckling load increase more rapidly; while with the increase of annular clearance,the buckling load will decrease. When the annular is larger than 35 mm,the helical buckling load is even smaller than sinusoidal buckling load.

关键词

水平井屈曲修井管柱仿真

Keywords

Horizontal wellBucklingWorkover stringSimulation

references

Views

141

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

SIMULATION AND EXPERIMENTAL STUDY ON STRENGTH AND FATIGUE PERFORMANCE OF A SUV FRONT SUBFRAME (MT)

BIONIC DESIGN OF THE MOVING JOINTS FOR GECKO BASED ON LINKAGE CONFIGURATION (MT)

GEOMETRIC PARAMETERS DETERMINATION AND SIMULATION OF SMALL-SIZED RV REDUCER

SIMULATION AND ANALYSIS OF THE BUCKLING BEHAVIOR OF A STIFF FILM/COMPLIANT SUBSTRATE COMPOSITE UNDER IN-PLANE COMPRESSION

STUDY THE EFFECT OF SHOT PEENING RESIDUAL STRESSES ON COMPRESSIVE STRENGTH OF STIFFENED PANEL

Related Author

No data

Related Institution

School of Mechanical Engineering, Liaoning Technical University

School of Mechanical Engineering, Xijing University

School of Mechanical Engineering, Hubei University of Technology

Chinese Flight Test Establishment

The First Aircraft Institute of AVIC

⁰