This article presents an experiment and simulation study on the effect of Z-pin reinforced on the pull-off and sheat carrying capacity of fiber placement composite T-joints,we used CMT5504 to conduct the pull-off test meanwhile we used MTS to conduct the shear test. we studied Z-pin reinforced And non-reinforced test-pieces,drawing Load-displacement curves.The pull-off test results donate that Z-pin can effectively improved the pull-off carrying capacity of T-joints and slow the decrease of the load significantly after pick loading compared to the non-reinforced T-joints. The failure location is between stiffener and interlayer. The shear test results donate that Z-pin can effectively improve the shear carrying capacity of T-joints. The failure location of Z-pin reinforced test is between skin and interlayer and the failure location of non-reinforced test is bwtween stiffener and interlayer. On this basis,we created pull-off and shear model of T-joint specimens. The interface failure was simulated with cohesive zone model,and the effect of Z-pin was simulated with nonlinear springs inserted into the interface. The numerical results agree well with the test data and shows that the model is effective.