MECHANICAL ANALYSIS AND DESIGN FOR PHOTO-ELECTRICITY MEASUREE QUIPMENT SHAFTING IN MOBILE-PLATFORM

JIANG WeiWei; HU HongYi; LIU RuZhen; HE Bi; CHEN ZHiMing

doi:10.16579/j.issn.1001.9669.2017.01.020

您当前的位置：

首页 >

文章列表页 >

MECHANICAL ANALYSIS AND DESIGN FOR PHOTO-ELECTRICITY MEASUREE QUIPMENT SHAFTING IN MOBILE-PLATFORM

更新时间：2022-09-22

- MECHANICAL ANALYSIS AND DESIGN FOR PHOTO-ELECTRICITY MEASUREE QUIPMENT SHAFTING IN MOBILE-PLATFORM
- Journal of Mechanical Strength Vol. 39, Issue 1, Pages: 117-121(2017)
- 作者机构：
  
  1. 中国科学院光电技术研究所
  2. 中国科学院光束控制重点实验室
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2017.01.020
  CLC：
扫描看全文
JIANG WeiWei, HU HongYi, LIU RuZhen, et al. MECHANICAL ANALYSIS AND DESIGN FOR PHOTO-ELECTRICITY MEASUREE QUIPMENT SHAFTING IN MOBILE-PLATFORM. [J]. 39(1):117-121(2017)
DOI：

JIANG WeiWei, HU HongYi, LIU RuZhen, et al. MECHANICAL ANALYSIS AND DESIGN FOR PHOTO-ELECTRICITY MEASUREE QUIPMENT SHAFTING IN MOBILE-PLATFORM. [J]. 39(1):117-121(2017) DOI： 10.16579/j.issn.1001.9669.2017.01.020.

摘要

为满足机动平台大型光电设备轴系应用要求,设计了动平台用轴系。光电设备由早期的地基固定式发展到动平台承载式,动平台的力学环境对设备轴系提出了新的要求。首先,基于现有的轴承结构和装配工艺给出三种轴系结构形式;其次,针对设备要承受动平台的力学环境,对轴系进行力学分析,推导轴系力学校核公式,该轴系设计分析方法为动平台光电设备轴系设计提供了理论依据。

Abstract

Design the shafting for photoelectric-equipment used in mobile-platform,mobile-platform. First,based on structure and assemble technicalof bearing put forward three kinds of structure for shafting,then,deduce the revise formulation for shafting aim at vibratory environment of mobile-platform,which was the theory basis for the shafting design in mobileplatform photo-electricity equipment.

关键词

动平台光电设备力学分析轴承

Keywords

Mobile-platformPhotoelectric-equipmentMechanical analysisBearing

references

Views

129

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

STUDY OF DOMAIN ADAPTIVE NETWORK AND BALANCED DYNAMIC DISTRIBUTION ADAPTIVE FAULT MIGRATION DIAGNOSIS OF BEARING UNDER VARIABLE CONDITIONS (MT)

RESEARCH ABOUT FAULT DIAGNOSIS OF BEARING BASED ON INSTRINSIC TIME SCALE DECOMPOSITION AND CONVOLUTIONAL NEURAL NETWORK

NEW METHOD FOR BEARING INTELLIGENT DIAGNOSIS BASED ON COMPRESSED SENSING AND MULTILAYER EXTREME LEARNING MACHINE

ROLLER BEARING FAULT RECOGNITION METHOD BASED ON CYCLIC AUTOCORRELATION AND MULTI-DOMAIN KERNEL LIMIT LEARNING MACHINE

MOTOR BEARING FAULT DIAGNOSIS BASED ON RELEVANCE VECTOR MACHINE OPTIMIZE BY IMPROVED FRUIT FLY OPTIMIZATION ALGORITHM

Related Author

No data

Related Institution

Inner Mongolia First Machinery Group Co.Ltd.

Yunnan Jingjian Rail Transit Investment Construction Co.Ltd.

Faculty of Mechanical and Electrical Engineering, Kunming University of Science and Technology

Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering

Energy and Power Engineering Institute,University of Shanghai for Science and Technology

⁰