RESEARCH ON DYNAMIC CHARACTERISTICS OF HYDRO-MECHANICAL CONTINUOUSLY VARIABLE TRANSMISSION

LI JuanLing; LIU LianTao; XIAO MaoHua; WANG TingTing; WANG Xia; ZHNAG HaiJun

doi:10.16579/j.issn.1001.9669.2017.01.003

您当前的位置：

首页 >

文章列表页 >

RESEARCH ON DYNAMIC CHARACTERISTICS OF HYDRO-MECHANICAL CONTINUOUSLY VARIABLE TRANSMISSION

更新时间：2022-09-22

- RESEARCH ON DYNAMIC CHARACTERISTICS OF HYDRO-MECHANICAL CONTINUOUSLY VARIABLE TRANSMISSION
- Journal of Mechanical Strength Vol. 39, Issue 1, Pages: 14-19(2017)
- 作者机构：
  
  1. 南京农业大学工学院
  2. 江苏省智能化农业装备重点实验室
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2017.01.003
  CLC：
扫描看全文
LI JuanLing, LIU LianTao, XIAO MaoHua, et al. RESEARCH ON DYNAMIC CHARACTERISTICS OF HYDRO-MECHANICAL CONTINUOUSLY VARIABLE TRANSMISSION. [J]. 39(1):14-19(2017)
DOI：

LI JuanLing, LIU LianTao, XIAO MaoHua, et al. RESEARCH ON DYNAMIC CHARACTERISTICS OF HYDRO-MECHANICAL CONTINUOUSLY VARIABLE TRANSMISSION. [J]. 39(1):14-19(2017) DOI： 10.16579/j.issn.1001.9669.2017.01.003.

摘要

分析液压机械无级变速箱的工作原理,研究一种适合水、旱两用大功率拖拉机的液压机械无级变速箱。依据水、旱两用拖拉机复杂的多工况作业要求设计液压机械无级变速箱方案,并基于Matlab软件平台,对该液压机械无级变速箱部分动态特性进行仿真分析。仿真结果表明配备本液压机械无级变速箱的水、旱两用大功率拖拉机能够满足在水田和旱田中边行驶边工作的要求,实现连续无级变速。

Abstract

Analyzing the working principle of Hydro-mechanical Continuously Variable Transmission（ HMCVT）,and studying a HMCVT for water-dry dual-purpose high-power tractor. To design a scheme for this HMCVT accord to the complex working requirements of the water-dry dual-purpose tractor,and then to make simulation analysis of the dynamic characteristic based on the MATLAB software platform. The simulation results show that the water-dry dual-use large power tractor equipped with the HMCVT can work when runs in the water-dry land,realizing the continuous velocity.

关键词

拖拉机液压机械无级变速箱动态特性无级变速

Keywords

TractorHydraulic machinery continuously variable transmissionDynamic characteristicsThe continuous velocity

references

Views

333

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

ANALYSIS OF DYNAMIC CHARACTERISTICS OF SPHERICAL HYBRID SLIDING BEARINGS BASED ON ORIFICE THROTTLING (MT)

DYNAMIC FINITE ELEMENT ANALYSIS OF ULTRA-HIGH PRESSURE CYLINDER BASED ON THERMAL STRESS

DYNAMIC CHARACTERISTICS OF INTERNAL CONTACT OF ROLLING BEARINGS UNDER DIFFERENT DEGREES OF FAILURE

RESEARCH ON CHARACTERISTICS OF DAMPING PARAMETERS OF SANDWICH STRUCTURE OF MACHINE TOOL COMPONENTS BASED ON MODAL ANALYSIS

DYNAMIC CHARACTERISTICS AND FATIGUE LIFE ANALYSIS OF PLOW BIT-HOLDER UNDER RANDOM LOAD

Related Author

No data

Related Institution

College of Mechanical Engineering, University of Shanghai for Science and Technology

San Ji Branch Company of Sinopec Oilfield Equipment Corporation

School of Naval Architecture ＆ Ocean Engineering,Huazhong University of Science and Technology

School of Mechanotronics and Vehicle Engineering,East China Jiaotong University

School of Mechanical Engineering,Tianjin University of Science ＆ Technology

⁰