STUDY ON TOUGHNESS OF DOMESTIC PRESSURE VESSEL STEEL Q345R AT LOW TEMPERATURE

CUI QingFeng; HUI Hu; WANG HaoYang; LI PeiNing

doi:10.16579/j.issn.1001.9669.2016.06.011

您当前的位置：

首页 >

文章列表页 >

STUDY ON TOUGHNESS OF DOMESTIC PRESSURE VESSEL STEEL Q345R AT LOW TEMPERATURE

更新时间：2022-09-22

- STUDY ON TOUGHNESS OF DOMESTIC PRESSURE VESSEL STEEL Q345R AT LOW TEMPERATURE
- Journal of Mechanical Strength Vol. 38, Issue 6, Pages: 1198-1204(2016)
- 作者机构：
  
  1. 华东理工大学承压系统及安全教育部重点实验室
  2. 中国特种设备检测研究院
  3. 北京航空航天大学材料科学与工程学院
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2016.06.011
  CLC：
扫描看全文
CUI QingFeng, HUI Hu, WANG HaoYang, et al. STUDY ON TOUGHNESS OF DOMESTIC PRESSURE VESSEL STEEL Q345R AT LOW TEMPERATURE. [J]. 38(6):1198-1204(2016)
DOI：

CUI QingFeng, HUI Hu, WANG HaoYang, et al. STUDY ON TOUGHNESS OF DOMESTIC PRESSURE VESSEL STEEL Q345R AT LOW TEMPERATURE. [J]. 38(6):1198-1204(2016) DOI： 10.16579/j.issn.1001.9669.2016.06.011.

摘要

基于实测的材料数据,运用缺陷评定的程序,针对ASME规范案例中关于我国常用压力容器用钢Q345R冲击韧性对豁免曲线的适用性问题的相关规定进行了探讨和分析。分析结果表明所用的Q345R正火板在低温下的冲击韧性与断裂韧性均优于ASME规范的要求值,ASME规范将Q345R归类于A曲线严重低估了材料本身的韧性。

Abstract

In the present paper,the relevant provision in the ASME Code Case about"Applicability of the ASME exemption curve for Chinese pressure vessel steel Q345R"has been analyzed by using failure assessment procedure on the basis of true material testing data. For the normalized Q345 R investigated in this paper,the results indicated that both Charpy impact toughness and fracture toughness at low temperature are better than the requirements in ASME Code,the provision in ASME Code classifying Q345 R in Exemption curve A excessively underestimated the toughness of the material.

关键词

豁免曲线失效评定最低设计金属温度(MDMT)Q345R

Keywords

Exemption CurvesFailure AssessmentMinimum Design Metal TemperatureQ345R

references

Views

307

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

No data

Related Author

No data

Related Institution

No data

⁰