IMPACT OF HARDENING ON J INTEGRAL AT THE SLIGHTLY CURVED ELASTICITY-PLASTICITY CRACK TIP UNDER QUASI-STATIC LOADS

YANG DaPeng; WANG JunJie; ZHAO Yao; LI TianYun

doi:10.16579/j.issn.1001.9669.2016.05.034

您当前的位置：

首页 >

文章列表页 >

IMPACT OF HARDENING ON J INTEGRAL AT THE SLIGHTLY CURVED ELASTICITY-PLASTICITY CRACK TIP UNDER QUASI-STATIC LOADS

更新时间：2022-09-22

- IMPACT OF HARDENING ON J INTEGRAL AT THE SLIGHTLY CURVED ELASTICITY-PLASTICITY CRACK TIP UNDER QUASI-STATIC LOADS
- Journal of Mechanical Strength Vol. 38, Issue 5, Pages: 1099-1102(2016)
- 作者机构：
  
  1. 郑州职业技术学院机械工程系
  2. 华中科技大学船舶与海洋工程学院
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2016.05.034
  CLC：
扫描看全文
YANG DaPeng, WANG JunJie, ZHAO Yao, et al. IMPACT OF HARDENING ON J INTEGRAL AT THE SLIGHTLY CURVED ELASTICITY-PLASTICITY CRACK TIP UNDER QUASI-STATIC LOADS. [J]. 38(5):1099-1102(2016)
DOI：

YANG DaPeng, WANG JunJie, ZHAO Yao, et al. IMPACT OF HARDENING ON J INTEGRAL AT THE SLIGHTLY CURVED ELASTICITY-PLASTICITY CRACK TIP UNDER QUASI-STATIC LOADS. [J]. 38(5):1099-1102(2016) DOI： 10.16579/j.issn.1001.9669.2016.05.034.

摘要

主要研究准静载荷作用下的硬化材料弹塑性弯曲裂纹尖端的J积分问题。综合考虑了准静作用应力,塑性区域边界上正应力与剪应力,利用二阶摄动方法与卡氏定理计算了硬化材料弹塑性弯曲裂纹尖端的J积分。作图分析了弹塑性弯曲裂纹尖端J积分大小与材料硬化指数之间的变化关系。在幂硬化材料中,弹塑性弯曲裂纹尖端J积分随着材料硬化指数n的增大而减少,当n等速均匀增加时,弹塑性弯曲裂纹尖端J积分加速减少,减少的幅度越来越大。当材料的硬化指数相同时,弯曲裂纹尖端J积分随外载荷的不断减小而逐渐减小。建立了一个计算硬化材料弹塑性弯曲裂纹J积分的理论模型。

Abstract

J integral of elastic-plastic curved crack in hardened material under quasi-static loads has been mainly studied,and curved crack tip J integral has been calculated as a practical application of a second order perturbation method and theorem of surname KA,where the effects of quasi-static applied stresses and quasi-static normal and shear stresses on the boundaries of plasticity area are synthetically taken into considerations. Diagrams have been constructed to analyse the transformation relationships between curved crack J integral and hardening exponents. Curved crack J integral will decrease when hardening exponents increase in hardened material. Curved crack J integral decrease extent will be more and more severe when hardening exponents increase evenly. Curved crack J integral will decrease when external loads decrease with the same hardening exponents. A theoretical model where J integral of elastic-plastic curved crack was calculated has been established in hardened material.

关键词

准静载荷硬化材料弯曲裂纹二阶摄动方法J积分

Keywords

Quasi-static loadsHardened materialCurved crackA second order perturbation solutionJ integral

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

IMPACT OF HARDENING ON SLIGHTLY CURVED ELASTICITY-PLASTICITY CRACK TIP DISPLACEMENT UNDER QUASI-STATIC LOADS

THE THREE DIMENSIONAL CURVED ELASTICITY-PLASTICITY CRACK TIP OPENING DISPLACEMENT UNDER QUASI-STATIC LOAD

PLASTICITY AREA AT THE THREE DIMENSIONAL CURVED ELASTICITY-PLASTICITY CRACK TIP UNDER QUASI-STATIC LOAD

IMPACT OF HARDENING ON PLASTICITY AREA AT THE SLIGHTLY CURVED ELASTICITY-PLASTICITY CRACK TIP UNDER QUASI-STATIC LOADS

SIMULATION ANALYSIS AND GROUND TEST OF SOLID ROCKET MOTOR GRAIN WITH SURFACE CRACK

Related Author

No data

Related Institution

Zhengzhou Technical College,Mechanical Engineering Department

Hua Zhong University of Science and Technology,School of Naval Architecture ＆ Ocean Engineering

Hua Zhong University of Science and Technology,School of Civil Engineering ＆Mechanics

Teaching Department,National Defense Science and Technology School of Zhengzhou City

School of Civil Engineering ＆ Mechanics,Postdoctoral Mobile Station of Mechanical Department,Huazhong University of Science and Technology

⁰