INFLUENCE OF BOUNDARY CONDITION ON COMPRESSIVE STABILITY PERFORMANCE OF STIFFENED THIN-WALL PANEL

ZHANG HaoYu; HE YuTing; ZHANG Fei; SHAO Qing; FENG Yu

doi:10.16579/j.issn.1001.9669.2016.04.037

您当前的位置：

首页 >

文章列表页 >

INFLUENCE OF BOUNDARY CONDITION ON COMPRESSIVE STABILITY PERFORMANCE OF STIFFENED THIN-WALL PANEL

更新时间：2022-09-22

- INFLUENCE OF BOUNDARY CONDITION ON COMPRESSIVE STABILITY PERFORMANCE OF STIFFENED THIN-WALL PANEL
- Journal of Mechanical Strength Vol. 38, Issue 4, Pages: 875-880(2016)
- 作者机构：
  
  1. 空军工程大学航空航天工程学院
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2016.04.037
  CLC：
扫描看全文
ZHANG HaoYu, HE YuTing, ZHANG Fei, et al. INFLUENCE OF BOUNDARY CONDITION ON COMPRESSIVE STABILITY PERFORMANCE OF STIFFENED THIN-WALL PANEL. [J]. 38(4):875-880(2016)
DOI：

ZHANG HaoYu, HE YuTing, ZHANG Fei, et al. INFLUENCE OF BOUNDARY CONDITION ON COMPRESSIVE STABILITY PERFORMANCE OF STIFFENED THIN-WALL PANEL. [J]. 38(4):875-880(2016) DOI： 10.16579/j.issn.1001.9669.2016.04.037.

摘要

应用非线性有限元方法对加筋板的压缩稳定性进行建模数值计算,通过定义加筋板有限元模型中四边节点的约束条件模拟压缩稳定性试验中承载端简支、固支边界条件以及常用的刀口支持、螺栓顶压、夹板夹持等侧边支持夹具,根据有限元计算结果分析承载端和侧边边界条件对加筋板压缩稳定性能的影响。计算结果表明,当承载端边界约束条件为固支时,结构的屈曲载荷与承载能力均比承载端简支时有一定的增加;当承载端简支时,结构的屈曲形式与破坏失效形式随侧边边界约束条件的不同而不同,相比于侧边自由的情况,侧边施加约束可以增加结构的屈曲载荷与承载能力;当承载端固支时,不同侧边边界约束条件下结构的屈曲形式与屈曲载荷基本相同,相比于侧边自由的情况,侧边施加约束可以增加结构的承载能力。

Abstract

Nonlinear finite element method（ FEM） was adopted to calculate the compressive stability of stiffened panel numerically. Simple support and clamped support of loaded ends as well as common used unloaded edge support fixtures,such as blade,bolt and rigid strip,for stability experiment were simulated by defining node constraint conditions of 4 edges of stiffened panel finite element model. The influences of boundary conditions of loaded ends and unloaded edges on compressive stability of stiffened panel were analyzed according to the FEM calculational results. Calculational results show that,buckling load and carrying capability of panel with loaded ends clamped are bigger than those of panel with loaded ends simply supported. When loaded ends are simply supported,both buckling pattern and failure pattern vary with different unloaded edge boundary conditions,and buckling loads of panel with unloaded edges supported are bigger than that of panel with unloaded edge free.When loaded ends are clamped,both buckling pattern and buckling load are almost the same despite different unloaded edge boundary conditions,whereas carrying capabilities of panel with unloaded edges supported are bigger than that of panel with unloaded edge free.

关键词

边界条件加筋板压缩稳定性支持夹具有限元

Keywords

Boundary conditionStiffened panelCompressive stabilitySupport fixtureFEM

references

Views

164

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

STRESSES ANALYSIS AND MULTI-AXIAL FATIGUE EVALUATION OF RESILIENT WHEEL

EFFECT OF BRAKE THERMAL STRESS ON UNIAXIAL FATIGUE OF RAILWAY WHEEL PLATE

STIFFENER-SKIN INTERFACE FAILURE CHARACTERIZATION OF THE STIFFENED COMPOSITE PANEL AT POST-BUCKLING STAGE

FAILURE ANALYSIS OF THE COATING OF TRANSMISSION MECHANISM BASED ON COHESIVE ZONE MODEL

STEADY-STATE TEMPERATURE FIELD AND STRESS FIELD ANALYSIS OF AUTOCLAVE TOOTH-LOCKED QUICK OPENING STRUCTURE

Related Author

No data

Related Institution

Technology Center,Ma’anshan Iron ＆ Steel Co.,Ltd.

Baowu Group Masteel Rail Transit Materials Technology Company Limited

School of Metallurgical Engineering,Anhui University of Technology

Tyre and Wheel Company,Ma’anshan Iron and Steel Co.Ltd.

Aeronautics Science and Technology Key Laboratory of Full Scale Aircraft Structure and Fatigue,Aircraft Strength Research Institute of China

⁰