STRUCTURAL STRENGTH ANALYSIS AND EXPERIMENTAL RESEARCH FOR WORKING DEVICE OF LOADER

WAN YiPin; JIA Jie; LIANG Jia; SONG XuDing

doi:10.16579/j.issn.1001.9669.2016.04.019

您当前的位置：

首页 >

文章列表页 >

STRUCTURAL STRENGTH ANALYSIS AND EXPERIMENTAL RESEARCH FOR WORKING DEVICE OF LOADER

更新时间：2022-09-22

- STRUCTURAL STRENGTH ANALYSIS AND EXPERIMENTAL RESEARCH FOR WORKING DEVICE OF LOADER
- Journal of Mechanical Strength Vol. 38, Issue 4, Pages: 772-776(2016)
- 作者机构：
  
  1. 长安大学道路施工技术与装备教育部重点实验室
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2016.04.019
  CLC：
扫描看全文
WAN YiPin, JIA Jie, LIANG Jia, et al. STRUCTURAL STRENGTH ANALYSIS AND EXPERIMENTAL RESEARCH FOR WORKING DEVICE OF LOADER. [J]. 38(4):772-776(2016)
DOI：

WAN YiPin, JIA Jie, LIANG Jia, et al. STRUCTURAL STRENGTH ANALYSIS AND EXPERIMENTAL RESEARCH FOR WORKING DEVICE OF LOADER. [J]. 38(4):772-776(2016) DOI： 10.16579/j.issn.1001.9669.2016.04.019.

摘要

为获得装载机工作装置载荷谱测点位置,全面评估工作装置的结构强度与疲劳强度。建立铲斗受力模型,利用六面体单元和接触单元对工作装置整体结构进行有限元建模,采用典型工况法对工作装置结构强度进行仿真和试验研究,结果表明仿真值与实测值基本吻合,两者误差在1.6%~7.3%之间,从而有效地确定了载荷测点位置区域。采用Goodman疲劳极限线图法对工作装置结构测点位置的疲劳强度进行评估,试验测点的应力仿真值和试验值都在Goodman曲线范围以内,表明结构满足疲劳强度要求。将静强度校核与疲劳强度评估相互结合,获得了一种较为完整的结构强度分析方法。结构强度分析与试验结果为装载机工作装置载荷谱测试与疲劳寿命分析提供依据。

Abstract

In order to obtain the positions of load spectrum measuring points of the loader working device,the structural strength and fatigue strength of the working device were evaluated. The bucket force model was set up and the working device finite element model was builted. The method with typical operating conditions was used in simulation and experimental research on the structure strength analysis. The results showed that the simulation results agree well with the measured values,and the error of them between the 1. 6% ,7. 3%,so as to effectively determine the load measuring point location area. Goodman fatigue limit diagram method was used to evaluate the fatigue strength of the measuring point. The results showed that the structure satisfied the requirements of fatigue strength. The static strength and fatigue strength evaluation were combined to obtain a more complete structural strength analysis method. Structural strength analysis and test results provide bases for the load spectrum test and fatigue life analysis of the loader working device.

关键词

装载机工作装置结构强度疲劳强度

Keywords

LoaderWorking deviceStructural strengthFatigue strength

references

Views

356

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

RESEARCH ON PLATFORM FATIGUE TEST ATTITUDE AND LOADING MODE OF EXCAVATOR WORKING DEVICE BASED ON MEASURED SPECTRUM

STUDY ON STRENGTH CONSTRAINTS OF OPTIMIZATION OF GEARBOX BASED ON FATIGUE THEORY

INFLUENCE STUDY ON THE LOGO OF AN ENGINE CONNECTING ROD TO ITS FATIGUE STRENGTH

MULTI-OBJECTIVE OPTIMIZATION DESIGN OF BACKHOE HYDRAULIC EXCAVATOR WORKING DEVICE BASED ON RESPONSE SURFACE METHODOLOGY

RESEARCH ON LOAD TEST AND SPECTRUM COMPILATION METHOD OF LOADER CONNECTING ROD

Related Author

No data

Related Institution

College of Rail Transit,Nanjing Communications Institute of Technology

Key Laboratory for Highway Construction Technology and Equipment of Ministry of Education,Chang’an University

College of Mechanical Engineering, University of Shanghai for Science and Technology

KunmingYunnei Power Co.Ltd.

Yunnan Xiyi Industrial Co.Ltd.

⁰