BASE ON FINITE ELEMENT ANALYSIS OF PNEUMATIC PARACHUTE-PACKING MACHINE BODY OPTIMUM DESIGN

DENG SanPeng; WANG YingFei; QI Yu Ming; ZHOU WangFa

doi:10.16579/j.issn.1001.9669.2016.03.039

您当前的位置：

首页 >

文章列表页 >

BASE ON FINITE ELEMENT ANALYSIS OF PNEUMATIC PARACHUTE-PACKING MACHINE BODY OPTIMUM DESIGN

更新时间：2022-09-22

- BASE ON FINITE ELEMENT ANALYSIS OF PNEUMATIC PARACHUTE-PACKING MACHINE BODY OPTIMUM DESIGN
- Journal of Mechanical Strength Vol. 38, Issue 3, Pages: 645-648(2016)
- 作者机构：
  
  1. 天津职业技术师范大学机器人及智能装备研究所
  2. 天津博乐科技有限公司
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2016.03.039
  CLC：
扫描看全文
DENG SanPeng, WANG YingFei, QI Yu Ming, et al. BASE ON FINITE ELEMENT ANALYSIS OF PNEUMATIC PARACHUTE-PACKING MACHINE BODY OPTIMUM DESIGN. [J]. 38(3):645-648(2016)
DOI：

DENG SanPeng, WANG YingFei, QI Yu Ming, et al. BASE ON FINITE ELEMENT ANALYSIS OF PNEUMATIC PARACHUTE-PACKING MACHINE BODY OPTIMUM DESIGN. [J]. 38(3):645-648(2016) DOI： 10.16579/j.issn.1001.9669.2016.03.039.

摘要

基于多体系统传递矩阵法对某型号包伞机进行有限元分析,针对整体结构的应力、位移进行了多点云图的研究,综合考虑机构的受力及变形对包伞机进行优化,经试验验证:优化后提高了包伞机的工作强度,满足了长时间满负荷工作要求。

Abstract

A finite element analysis basing on transfer matrix method of multibody system for the parachute packing machine was finished in this article. After the research of multi-point cloud with the stress and displacement of the whole structure,considering the stress and deformation of the organization,the parachute packing machine has been optimized. It also has been verified by test that: the optimization has improved the working strength of the parachute packing machine,and the requirements of long time working at full capacity can be reached.

关键词

包伞机Ansys workbench有限元分析结构优化

Keywords

Pneumatic parachute-packing machineAnsys workbenchFinite element analysisBody optimum design

references

Views

184

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

DESIGN AND SIMULATION VERIFICATION OF METRO ENERGY ABSORBED STRUCTURE BASED ON ASME RT-2 STANDARD (MT)

EXPERIMENTAL STUDY ON FRETTING FATIGUE OF 2024 ALUMINUM ALLOY UNDER ALTERNATING NORMAL LOAD (MT)

CREEP DAMAGE CONSTITUTIVE MODEL OF FE-CR-NI BASED AUSTENITIC STAINLESS STEEL

RESEARCH ON ACCURATE MODELING OF HYDROSTATIC MOTORIZED SPINDLE BASED ON RESPONSE SURFACE OPTIMIZATION ALGORITHM

RESEARCH ON FATIGUE CRACK PROPAGATION BEHAVIOR AND LIFE PREDICTION OF WIND TURBINE GEAR

Related Author

No data

Related Institution

Carbody Platform Department,CRRC Changchun

School of Mechanical-Electrical and Vehicle Engineering, Beijing University of Civil Engineering and Architecture

Beijing Key Laboratory of Performance Guarantee on Urban Rail Transit Vehicles

School of Mechanical Engineering,Inner Mongolia University of Science and Technology

School of Mechanical and Power Engineering,Nanjing Tech University

⁰