STRUCTURAL OPTIMIZATION OF THE EXCAVATOR ENGINE HOOD BASED ON MODAL ANALYSIS

YANG WeiPing; HOU Liang; CAI HuiKun; LI ShengYu; ZHANG EnLai; WANG WenWu

doi:10.16579/j.issn.1001.9669.2016.03.020

您当前的位置：

首页 >

文章列表页 >

STRUCTURAL OPTIMIZATION OF THE EXCAVATOR ENGINE HOOD BASED ON MODAL ANALYSIS

更新时间：2022-09-22

- STRUCTURAL OPTIMIZATION OF THE EXCAVATOR ENGINE HOOD BASED ON MODAL ANALYSIS
- Journal of Mechanical Strength Vol. 38, Issue 3, Pages: 537-542(2016)
- 作者机构：
  
  1. 厦门大学物理与机电工程学院
  2. 厦门厦工机械股份有限公司
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2016.03.020
  CLC：
扫描看全文
YANG WeiPing, HOU Liang, CAI HuiKun, et al. STRUCTURAL OPTIMIZATION OF THE EXCAVATOR ENGINE HOOD BASED ON MODAL ANALYSIS. [J]. 38(3):537-542(2016)
DOI：

YANG WeiPing, HOU Liang, CAI HuiKun, et al. STRUCTURAL OPTIMIZATION OF THE EXCAVATOR ENGINE HOOD BASED ON MODAL ANALYSIS. [J]. 38(3):537-542(2016) DOI： 10.16579/j.issn.1001.9669.2016.03.020.

摘要

挖掘机发动机罩通常由薄板件与加强筋通过焊接而成。在发动机和路面的激励作用下,其薄板结构容易产生严重的振动响应,直接导致结构某些薄弱位置的变形、开裂等问题。利用HyperWorks软件建立了某型挖掘机发动机罩有限元模型,对其进行了模态分析,得到了其在自由状态下的前四阶固有频率及振型,并通过模态实验验证了仿真结果的准确性。依据实验与数值模态分析结果,对该发动机罩进行了结构优化。与原结构相比,优化后发动机罩刚度有所提高,典型振型的最大变形量大幅降低,其动态性能得到明显改善。

Abstract

Excavator engine hoods are usually formed by welding sheet parts and stiffeners together. Under the incentives of engine and road,the sheet parts are easy to produce serious vibrational response,which directly results in the deformation and the cracking of some weak positions of the structure. The finite element model of an excavator engine hood was established and modal analysis was conducted by using Hyper Works software. Its first four order natural frequencies and corresponding mode shapes in free state were obtained. The accuracy of the simulation results were verified by a modal experiment. Based on the results of the modal experiment and the modal analysis,the structure of the engine hood was optimized. Comparing with the original structure,the stiffness of the optimized engine hood increased and the maximum deformation of typical modes decreased significantly,which indicates that its dynamic performance improves obviously.

关键词

模态分析发动机罩HyperWorks结构优化

Keywords

Modal analysisEngine hoodHyperWorksStructural optimization

references

Views

253

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

PARAMETER ANALYSIS AND OPTIMIZATION OF MAGNETIC ADSORPTION UNIT FOR CRAWLER WALL-CLIMBING ROBOT (MT)

VIBRATION MODAL CHARACTERISTICS OF THE HIGH-PRECISION RV REDUCER CONSIDERING MESH STATE

FLEXIBLE DYNAMICS ANALYSIS OF SLEY SYSTEM FOR HIGH-SPEED RAPIER LOOM BASED ON FINITE ELEMENT METHOD

OPTIMIZATION DESIGN OF TOWER STRUCTURE OF LARGE WIND TURBINE

STRUCTURAL OPTIMIZATION OF GEARBOX CASES BASED ON FATIGUE LIFE PREDICTION

Related Author

No data

Related Institution

College of Mechanical and Vehicle Engineering, Hunan University

School of Mechanical Engineering, Hebei University of Technology

Ningbo Zhongda Leader Intelligent Transmission Co., Ltd.

Zhejiang Provincial Key Lab of Part Rolling Technology,Ningbo University

Tianjin Key Laboratory of Advanced Mechatronics Equipment Technology

⁰