NUMERICAL MODAL ANALYSIS OF DOUBLE ARC GEAR

ZHANG Lan

doi:10.16579/j.issn.1001.9669.2016.02.038

您当前的位置：

首页 >

文章列表页 >

NUMERICAL MODAL ANALYSIS OF DOUBLE ARC GEAR

更新时间：2022-09-22

- NUMERICAL MODAL ANALYSIS OF DOUBLE ARC GEAR
- Journal of Mechanical Strength Vol. 38, Issue 2, Pages: 425-428(2016)
- 作者机构：
  
  1. 西安航空职业技术学院基础部
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2016.02.038
  CLC：
扫描看全文
ZHANG Lan. NUMERICAL MODAL ANALYSIS OF DOUBLE ARC GEAR. [J]. 38(2):425-428(2016)
DOI：

ZHANG Lan. NUMERICAL MODAL ANALYSIS OF DOUBLE ARC GEAR. [J]. 38(2):425-428(2016) DOI： 10.16579/j.issn.1001.9669.2016.02.038.

摘要

双圆弧齿轮广泛应用于高负载减速器中,其固有模态对减速器的性能有重要的影响。计算模态分析是使用有限元软件对零件进行模态分析的高效方法。本文利用Abaqus/CAE软件对双圆弧齿轮进行了约束状态下的模态分析,讨论齿轮在齿轮的螺线角对起固有模态的影响。为减速器动力学性能优化、振动故障分析和预报提供依据。

Abstract

Double arc gears are widely used in high load speed reducers,and the inherent mode has an important influence on the performance of the reducer. Computational modal analysis is an efficient method for modal analysis of components using finite element software. In this paper,the modal analysis of the double arc gear was carried out using ABAQUS / CAE software,and discussed the gear in the gear spiral angle on the impact of modal. It will provide basis for dynamic performance optimization,vibration fault analysis and prediction.

关键词

双圆弧齿轮有限元故障分析

Keywords

Double arc gearFinite elementModal analysis

references

Views

164

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

UN R127 PEDESTRIAN PROTECTION ANALYSIS AND OPTIMIZATION OF THE VEHICLE

EVALUATION FOR REMAINING LIFE OF BRIDGE CRANE BASED ON RADIAL BASIS NEURAL NETWORK

MILLING OF WEAK RIGID PARTS BASED ON MRF FLEXIBLE AUXILIARY SUPPORT

ANALYSIS OF DYNAMIC LOAD STRENGTH OF WIND TURBINE ROOT BOLT UNDER TURBULENCE MODEL

LIFE ANALYSIS OF LOW SPEED DIESEL ENGINE BEDPLATE BASED ON CRACK GROWTH

Related Author

No data

Related Institution

Faw Haima Automobile Co.,Ltd.

Department of Industry and Information Engineering,Vocational Technology College of Hainan

School of Mechanical Engineering, Taiyuan University of Science and Technology

School of Mechanical Engineering, University of Shanghai for Science and Technology

School of Mechanical Engineering, Shenyang University of Technology

⁰