A GRADIENT-LESS PARAMETER APPROACH FOR SHAPE OPTIMIZATION

TIAN Shuai; ZHANG Qing; QIN XianRong; SUN YuanTao

doi:10.16579/j.issn.1001.9669.2016.02.011

您当前的位置：

首页 >

文章列表页 >

A GRADIENT-LESS PARAMETER APPROACH FOR SHAPE OPTIMIZATION

更新时间：2022-09-22

- A GRADIENT-LESS PARAMETER APPROACH FOR SHAPE OPTIMIZATION
- Journal of Mechanical Strength Vol. 38, Issue 2, Pages: 265-270(2016)
- 作者机构：
  
  1. 同济大学机械与能源学院
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2016.02.011
  CLC：
扫描看全文
TIAN Shuai, ZHANG Qing, QIN XianRong, et al. A GRADIENT-LESS PARAMETER APPROACH FOR SHAPE OPTIMIZATION. [J]. 38(2):265-270(2016)
DOI：

TIAN Shuai, ZHANG Qing, QIN XianRong, et al. A GRADIENT-LESS PARAMETER APPROACH FOR SHAPE OPTIMIZATION. [J]. 38(2):265-270(2016) DOI： 10.16579/j.issn.1001.9669.2016.02.011.

摘要

采用参数化无梯度方法,针对机械结构在外力作用下,局部出现应力集中现象,进行了形状优化。被优化的边界采用样条曲线代替,通过调整样条曲线控制点的坐标改变边界的形状,进而调整边界上的应力分布。边界上的平均应力被选作参考应力,每一个迭代步中,边界上应力比参考应力大的控制点,其位置往外移动以增加材料;同时,比参考应力小的控制点,其位置减少材料。优化实例定义了两个可行域和三个初始形状,以比较可行域以及初始形状对优化结果的影响。同时还研究了控制数的大小对优化过程和结果的影响。

Abstract

A gradient-less parametrical approach has been employed to optimize the stress concentration on local part. The design boundary was represented by splines and the shape of boundary can be varied by adjusting the coordinate of control points.By doing so to varying the stress distribution on design boundary. The average stress on design boundary was selected as the reference stress. Control points with higher stress than average stress move outward to add material; meanwhile,control points with lower stress move inward to reduce material to fulfill the shape optimization. Two feasible zones and three start shapes have been employed in optimization instances to compare the influence of the different feasible zones and start shapes,respectively.The influence of the control parameters to the optimization process and result have also been studied.

关键词

形状优化应力集中无梯度有限元法

Keywords

Shape optimizationStress concentrationGradient-lessFinite element method

references

Views

102

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

RESEARCH ON THE LIFETIME CRACK INITIATION AND RELIABILITY OF THE PRESSURE VESSEL WITH OBLIQUE NOZZLES IN GATHERING AND TRANSPORTATION

VIBRATION MODAL CHARACTERISTICS OF THE HIGH-PRECISION RV REDUCER CONSIDERING MESH STATE

RESEARCH ON STRAIGHTENING METHOD OF STEPPED PIPE

FINITE ELEMENT ANALYSIS AND OPTIMAL DESIGN OF A RADAR BLOCK STRUCTURE

STRESS INTENSITY FACTORS OF TYPICAL PERIODIC CRACKS IN FIN-SHAPED SHELL UNDER BENDING

Related Author

No data

Related Institution

College of Petrochemical Technology,Lanzhou University of Technology

Ningbo Zhongda Leader Intelligent Transmission Co., Ltd.

Zhejiang Provincial Key Lab of Part Rolling Technology,Ningbo University

Key Lab of Manufacturing Equipment of Shaanxi Province,School of Mechanical and Precision Instrument Engineering,Xi’an University of Technology

Zhengzhou Machinery Research Institute Co.,Ltd.

⁰