STRUCTURE DESIGN AND STRENGTH ANALYSIS OF THE SLIDER OF A ROCKET PROJECTILE

YUE XiaoHong; WANG JunPing; LI ShunLi; HUANG HanJun; LV Jian

doi:10.16579/j.issn.1001.9669.2016.01.35

您当前的位置：

首页 >

文章列表页 >

STRUCTURE DESIGN AND STRENGTH ANALYSIS OF THE SLIDER OF A ROCKET PROJECTILE

更新时间：2022-09-22

- STRUCTURE DESIGN AND STRENGTH ANALYSIS OF THE SLIDER OF A ROCKET PROJECTILE
- Journal of Mechanical Strength Vol. 38, Issue 1, Pages: 187-191(2016)
- 作者机构：
  
  1. 中国工程物理研究院总体工程研究所
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2016.01.35
  CLC：
扫描看全文
YUE XiaoHong, WANG JunPing, LI ShunLi, et al. STRUCTURE DESIGN AND STRENGTH ANALYSIS OF THE SLIDER OF A ROCKET PROJECTILE. [J]. 38(1):187-191(2016)
DOI：

YUE XiaoHong, WANG JunPing, LI ShunLi, et al. STRUCTURE DESIGN AND STRENGTH ANALYSIS OF THE SLIDER OF A ROCKET PROJECTILE. [J]. 38(1):187-191(2016) DOI： 10.16579/j.issn.1001.9669.2016.01.35.

摘要

滑块是决定火箭弹发射稳定性和安全性的关键件之一,是火箭弹重要组成部分。介绍一种满足滑轨下挂发射方式的滑块的结构设计。首先在滑块离轨速度和离轨时间理论分析的基础上,对滑块结构进行了设计。通过数值模拟分析、校核了前滑块未脱离轨道和脱离轨道两种情况下的强度。结果表明:滑块强度满足发射要求。本滑块在某火箭弹飞行试验中得到了较好的应用,试验验证了滑块设计的合理性。

Abstract

Slider is one of the main parts of a rocket projectile,which determines the stability and safety of a rocket launch. A slider structure design that satisfies the suspended-type launch was introduced in this research. Based on the theoretical analysis of offtrack speed and time,the slider structure was designed. By using numerical simulations,the strength of front slider under two different situations,ontrack and offtrack,was checked. The results show that the strength of slider meets the design requirement. The designed slider was applied to a rocket projectile flying test and the design feasibility was verified.

关键词

火箭弹滑块结构设计强度分析

Keywords

Rocket projectileSliderStructure designStrength analysis

references

Views

121

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

EXPERIMENTAL RESEARCH ON STRESS DISTRIBUTION CHARACTERISTICS OF RECTANGULAR VESSEL OF DESALINATION PILOT PLANT

STRENGTH ANALYSIS OF RAILWAY PASSENGER VEHICLE WATER TANK BASED ON TWO-WAY FLUID-SOLID INTERACTION

FAILURE ANALYSIS OF AUTO SEAT BACKREST ADJUSTER BASED ON GTN MODEL

EFFECT OF HEATING MODE ON THE STRIP STRENGTH OF THE CRYOGENIC STORAGE TANK DURING VACUUMIZING

FATIGUE STRENGTH ANALYSIS OF CONNECTING ROD BOLT FOR LARGE POWER DIESEL ENGINE

Related Author

No data

Related Institution

Hebei Guohua Cangdong Electricity Generated Limited Liability Company

School of Mechatronic Engineering,Lanzhou Jiaotong University

College of Automotive Studies,Tongji University

FAW-Volkswagen Automotive Co.,Ltd.

School of Chemical Engineering,Hebei University of Technology

⁰