STRUCTURE AND DISPLACEMENT ANALYSIS FOR COMPLIANT PARALLEL ROBERTS MECHANISM AND MICRO-POSITIONING STAGE

HE Lei; JI XiaoMin; YANG XianHai; WANG HongMei

doi:10.16579/j.issn.1001.9669.2015.06.012

您当前的位置：

首页 >

文章列表页 >

STRUCTURE AND DISPLACEMENT ANALYSIS FOR COMPLIANT PARALLEL ROBERTS MECHANISM AND MICRO-POSITIONING STAGE

更新时间：2022-09-22

- STRUCTURE AND DISPLACEMENT ANALYSIS FOR COMPLIANT PARALLEL ROBERTS MECHANISM AND MICRO-POSITIONING STAGE
- Journal of Mechanical Strength Vol. 37, Issue 6, Pages: 1057-1063(2015)
- 作者机构：
  
  1. 西安理工大学精密仪器与机械工程学院
  2. 山东理工大学机械工程学院
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2015.06.012
  CLC：
扫描看全文
HE Lei, JI XiaoMin, YANG XianHai, et al. STRUCTURE AND DISPLACEMENT ANALYSIS FOR COMPLIANT PARALLEL ROBERTS MECHANISM AND MICRO-POSITIONING STAGE. [J]. 37(6):1057-1063(2015)
DOI：

HE Lei, JI XiaoMin, YANG XianHai, et al. STRUCTURE AND DISPLACEMENT ANALYSIS FOR COMPLIANT PARALLEL ROBERTS MECHANISM AND MICRO-POSITIONING STAGE. [J]. 37(6):1057-1063(2015) DOI： 10.16579/j.issn.1001.9669.2015.06.012.

摘要

分析了平行四杆柔性机构与并联Roberts柔性机构的伪刚体模型,并对其耦合位移进行了定性比较;利用闭环矢量法确定了Roberts机构特征点位置;建立了考虑轴漂的位移计算模型,与有限元仿真值相比该模型的最大相对误差仅为2.43%;将对称布置的并联Roberts柔铰机构应用于微定位平台,提出了一种3-PRR微动平台新结构,利用功能转化原理建立了整体机构的输入输出关系矩阵,并与试验结果作了对比,结果表明绕z轴转角的最大误差为5.60%。

Abstract

Pseudo-rigid-body model of compliant parallel four-bar mechanism and compliant Roberts mechanism was analyzed and the coupling displacement of it was compared qualitatively. Using closed loop vector method,the characteristic point position of Roberts mechanism was determined. The displacement calculation model was established considering the central shift of rotation. Compared with the simulation results of finite element,the maximum relative error of this model is only 2. 43%. The symmetrical compliant Roberts mechanism was applied on micro-motion platform,a new structure of 3- PRR micro-motion platform is proposed. Using the functional transformation theory,the input and output relational matrix was established.Compared with the experimental results,the result shows that the maximum error of angle around z axis is 5. 60%.

关键词

Roberts柔性机构轴漂有限元微动平台

Keywords

Compliant Roberts mechanismThe central shift of rotationFinite element analysisMicropositioning stage

references

Views

233

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

RESEARCH ON THE RESIDUAL STRESS OF THE CRYSTAL SURFACE DURING LAPPING PROCESS BASED ON A SINGLE PARTICLE MODEL

STRENGTH RESEARCH AND OPTIMIZATION DESIGN OF TWIST BEAM BASED ON FINITE ELEMENT ANALYSIS

Related Author

No data

Related Institution

Sichuan Branch,China Classification Society Certification Company

Research Center of Laser Fusion,China Academy of Engineering Physics

Haval R＆D Center of Great Wall Motor Company,Automotive Technical Center of Hebei

⁰