RELIABILITY ANALYSIS OF MECHANISM OVER-CENTER LOCKING CONSIDERING WEAR AND CLEARANCE

QIN Qiang; LI TingTing; FENG YunWen; XUE XiaoFeng

doi:10.16579/j.issn.1001.9669.2015.05.020

您当前的位置：

首页 >

文章列表页 >

RELIABILITY ANALYSIS OF MECHANISM OVER-CENTER LOCKING CONSIDERING WEAR AND CLEARANCE

更新时间：2022-09-22

- RELIABILITY ANALYSIS OF MECHANISM OVER-CENTER LOCKING CONSIDERING WEAR AND CLEARANCE
- Journal of Mechanical Strength Vol. 37, Issue 5, Pages: 874-879(2015)
- 作者机构：
  
  1. 西北工业大学航空学院
  2. 中国航空工业集团第一飞机设计研究院
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2015.05.020
  CLC：
扫描看全文
QIN Qiang, LI TingTing, FENG YunWen, et al. RELIABILITY ANALYSIS OF MECHANISM OVER-CENTER LOCKING CONSIDERING WEAR AND CLEARANCE. [J]. 37(5):874-879(2015)
DOI：

QIN Qiang, LI TingTing, FENG YunWen, et al. RELIABILITY ANALYSIS OF MECHANISM OVER-CENTER LOCKING CONSIDERING WEAR AND CLEARANCE. [J]. 37(5):874-879(2015) DOI： 10.16579/j.issn.1001.9669.2015.05.020.

摘要

根据机构的具体安装形式,综合考虑了铰链磨损与杆端关节轴承磨损对机构过中心锁定可靠性的影响。提出了自润滑杆端关节轴承磨损计算模型,在"有效杆长理论"和"连续接触模型"的假设下建立了平面四连杆机构过中心锁定可靠性分析模型,给出了在考虑初始间隙与磨损情况下的机构过中心锁定可靠性分析方法,并对机构使用关节轴承和铰链连接情况下的过中心可靠性进行了对比分析。研究结果表明,机构过中心锁定失效概率会在机构运动周期达到一定次数后迅速增加;在机构中采用自润滑杆端关节轴承可以显著提高机构过中心锁定可靠性。

Abstract

Depending on the form of mechanism,the hinge wear and rod end bearing wear are considered respectively,and the self-lubricating rod end bearing wear model are established.Then the over-center locking reliability analysis model of four bar linkage mechanism is built under the "effective lever length theory"and "continuous contact model"hypothesis,besides,a reliability analysis method of over-center locking considering the initial clearance and wear is presented.The results show that the failure probability of mechanism over-center locking will rapidly increase after a certain number of cycles; the reliability of mechanism over-center locking will be significantly improved by using self-lubricating rod end spherical plain bearing.

关键词

杆端关节轴承过中心锁定磨损间隙可靠性

Keywords

Rod end spherical plain bearingOver-center lockingWearClearanceReliability

references

Views

214

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

STUDY ON FATIGUE SCATTER FACTOR OF AIRCRAFT STRUCTURE UNDER DURABILITY SEVERE LOAD SPECTRUM

SURFACE MORPHOLOGY ANALYSIS OF CONNECTING ROD AND CRANKSHAFT OF COMPRESSOR UNDER DIFFERENT WORKING CONDITIONS

NUMERICAL SIMULATION AND RELIABILITY SENSITIVITY ANALYSIS OF BIONIC KILLER WHALES’S LOAD CHARACTERISTIC

PROBABILITY ANALYSIS ON LAST PLY FAILURE OF COMPOSITE LAMINATES BASED ON UNIVERSAL GENERATING FUNCTION METHOD

COLLABORATIVE ANALYSIS OF AIR-COOLED TURBINE BLADE LOW-CYCLE FATIGUE RELIABILITY

Related Author

No data

Related Institution

Chengdu Aircraft Design and Research Institute

School of Energy ＆ Power Engineering of Huazhong University of Science ＆ Technology

Post-Doctoral Research Center of Huangshi Donper Electrical Appliance Co.,Ltd.

School of Mechanical ＆ Electrical Engineering of Hubei Polytechnic University

School of Mechanical Engineering,Shenyang Ligong University

⁰