ANALYSIS OF THE FACTORS WHICH CAN AFFECT THE PRELOAD OF THE WHEEL BOLTED JOINT

QIAN HaiTing; RAO LiFang; HAN YuQi

doi:10.16579/j.issn.1001.9669.2015.03.034

您当前的位置：

首页 >

文章列表页 >

ANALYSIS OF THE FACTORS WHICH CAN AFFECT THE PRELOAD OF THE WHEEL BOLTED JOINT

更新时间：2022-09-22

- ANALYSIS OF THE FACTORS WHICH CAN AFFECT THE PRELOAD OF THE WHEEL BOLTED JOINT
- Journal of Mechanical Strength Vol. 37, Issue 3, Pages: 440-444(2015)
- 作者机构：
  
  1. 上海汽车集团股份有限公司技术中心
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2015.03.034
  CLC：
扫描看全文
QIAN HaiTing, RAO LiFang, HAN YuQi. ANALYSIS OF THE FACTORS WHICH CAN AFFECT THE PRELOAD OF THE WHEEL BOLTED JOINT. [J]. 37(3):440-444(2015)
DOI：

QIAN HaiTing, RAO LiFang, HAN YuQi. ANALYSIS OF THE FACTORS WHICH CAN AFFECT THE PRELOAD OF THE WHEEL BOLTED JOINT. [J]. 37(3):440-444(2015) DOI： 10.16579/j.issn.1001.9669.2015.03.034.

摘要

车轮轮毂、刹车盘、轴承法兰等由螺纹紧固件连接起来的机械系统称为车轮螺纹接头,将车轮螺纹接头的夹紧力作为研究目标,将轮毂、紧固件作为研究对象,通过理论和一系列的对比实验,从轮毂材料、轮毂使用次数、紧固件结构形式等方面分析这两者对车轮螺纹接头夹紧力的影响。研究结果对设计一个具有良好夹紧特性的车轮螺纹接头有一定的指导作用。

Abstract

Wheel bolted joint,which is consisted of wheel,brake disc,bearing flange and the threaded fasteners which clamp the components,is a mechanical system. This paper discusses the clamp load of the wheel bolted joint,and takes the wheel and threaded fasteners as the research objectives. And this paper studies how the two components affect the clamp load of the joint. The result of this paper provides guidance to design a robust wheel bolted joint.

关键词

车轮夹紧力紧固件

Keywords

WheelClamp loadFastener

references

Views

224

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

STUDY ON FATIGUE LIFE OF THIN-WALL STRUCTURE FASTENERS OF AIRCRAFT

Related Author

No data

Related Institution

Beijing Aeronautical Research Center of Engineering ＆ Technology

Shenyang Aircraft design and Research Institute

⁰