X70 STEEL CRITICAL CTOD VALUE ANSYS CALCULATION

YE YunQin; MIAO ZhangMu; ZHANG BuAi

doi:10.16579/j.issn.1001.9669.2015.03.017

您当前的位置：

首页 >

文章列表页 >

X70 STEEL CRITICAL CTOD VALUE ANSYS CALCULATION

更新时间：2022-09-22

- X70 STEEL CRITICAL CTOD VALUE ANSYS CALCULATION
- Journal of Mechanical Strength Vol. 37, Issue 3, Pages: 562-566(2015)
- 作者机构：
  
  1. 武汉理工大学交通学院
  2. 中建二局一公司上海分公司
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2015.03.017
  CLC：
扫描看全文
YE YunQin, MIAO ZhangMu, ZHANG BuAi. X70 STEEL CRITICAL CTOD VALUE ANSYS CALCULATION. [J]. 37(3):562-566(2015)
DOI：

YE YunQin, MIAO ZhangMu, ZHANG BuAi. X70 STEEL CRITICAL CTOD VALUE ANSYS CALCULATION. [J]. 37(3):562-566(2015) DOI： 10.16579/j.issn.1001.9669.2015.03.017.

摘要

随着海洋工程的发展,探索海洋油气的项目增多,天然气、石油的输送工程也日渐发展起来。UOE生产工艺下的高强X70钢被广泛运用到油气输运工程中,然后强度越高的钢其断裂韧度越低,需对这种高强钢的断裂韧度值进行确定。材料断裂韧度大小可以用临界裂纹尖端张开位移CTOD(crack tipopening displacement)来度量。临界CTOD是弹塑性断裂力学中重要的参数,其大小直接反映了裂纹尖端材料抵抗开裂的能力,临界CTOD值越大表示材料抗开裂性能越好,反之抗开裂性能越差,确定临界CTOD值意义重大。首先依据BS7448规范对X70钢断裂韧度临界CTOD值进行了测试,然后利用Ansys软件从CTOD定义出发对X70钢临界CTOD进行了计算,实现了试验与模拟的对比分析,可供压力容器和管道生产和结构安全性评估企业借鉴。

Abstract

With the development of ocean engineering,increase in the number of project exploration of Marine oil and gas,natural gas and oil transportation engineering are increasingly developed. UOE production technology of high strength of X70 steel is widely used in oil and gas transportation project,and then the higher the strength of steel,the fracture toughness is lower. We need to determine the identity of the fracture toughness values. Material fracture toughness size can use critical crack tip opening displacement CTOD（ crack tipopening below） to measure. Critical CTOD is important parameters in elastic-plastic fracture mechanics,the size directly reflects the material’s ability to resist cracking. The bigger the critical value of CTOD show that the cracking resistance of materials,the better. Determining the critical value of CTOD is of great significance. On the basis of BS7448 specification of X70 steel critical fracture toughness CTOD was tested,and then by using ANSYS software of X70 steel in terms of CTOD define critical CTOD was calculated,and implement the test and simulation comparison and analysis,safety asses

关键词

X70钢CTODAnsys

Keywords

X70 steelCrack tipopening displacement（CTOD）ANSYS

references

Views

160

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

ANALYSIS OF LOAD-BEARING MESHING CHARACTERISTICS OF CYCLOIDAL PINWHEEL OF RV REDUCER BASED ON FINITE ELEMENT MODELING (MT)

ANALYSIS FOR SOLENOID VALVE FAILURE BASED ON MULTI-PHYSICS FINITE ELEMENT MODEL

THERMAL STRESS ANALYSIS AND FATIGUE CHECK OF MAIN STEAM SAFETY VALVE FOR NUCLEAR POWER STATIONS

DURABILITY FATIGUE PREDICTION AND STRUCTURE OPTIMIZATION OF LOAD-BEARING KEY PART OF TRACKED VEHICLE

EFFECTS ANALYSIS OF PRESSURE ON THE MAGNETIC MEMORY SIGNALS OF PIPELINE DEFECTS

Related Author

No data

Related Institution

Hebei Key Laboratory of Robot Sensing and Human-Robot Integration, School of Mechanical Engineering,Hebei University of Technology

State Key Laboratory of Reliability and Intelligence of Electrical Equipment, Hebei University of Technology

College of Aerospace Engineering,Air Force Engineering University

China National Nuclear Corporation,CNNC

Neway Valve (Suzhou) Co.,Ltd.

⁰