RESERACH ON FATIGUE BEHAVIOUR COMPARISON OF ALUMINUM RIVETED JOINT AND FRICTION STIR WELDING JOINT

ZHANG YanJun; LI XiaoPeng

doi:10.16579/j.issn.1001.9669.2015.03.014

您当前的位置：

首页 >

文章列表页 >

RESERACH ON FATIGUE BEHAVIOUR COMPARISON OF ALUMINUM RIVETED JOINT AND FRICTION STIR WELDING JOINT

更新时间：2022-09-22

- RESERACH ON FATIGUE BEHAVIOUR COMPARISON OF ALUMINUM RIVETED JOINT AND FRICTION STIR WELDING JOINT
- Journal of Mechanical Strength Vol. 37, Issue 3, Pages: 429-434(2015)
- 作者机构：
  
  1. 中航工业第一飞机设计研究院
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2015.03.014
  CLC：
扫描看全文
ZHANG YanJun, LI XiaoPeng. RESERACH ON FATIGUE BEHAVIOUR COMPARISON OF ALUMINUM RIVETED JOINT AND FRICTION STIR WELDING JOINT. [J]. 37(3):429-434(2015)
DOI：

ZHANG YanJun, LI XiaoPeng. RESERACH ON FATIGUE BEHAVIOUR COMPARISON OF ALUMINUM RIVETED JOINT AND FRICTION STIR WELDING JOINT. [J]. 37(3):429-434(2015) DOI： 10.16579/j.issn.1001.9669.2015.03.014.

摘要

通过2524-T3铝合金的搅拌摩擦焊接头疲劳性能对比试验,得到了母材、FSW对接接头、铆钉连接接头的疲劳S-N曲线。试验表明,搅拌摩擦焊的疲劳裂纹大多数起源于焊缝底部;2524-T3材料薄板的疲劳性能略好于厚板的疲劳性能;搅拌摩擦焊接头疲劳性能要明显好于铆接接头疲劳性能。拟合得到了各种不同厚度,不同应力比下的S-N曲线公式,为搅拌摩擦焊技术应用于飞机结构积累了相关数据。

Abstract

S-N curves of 2524-T3 parental material,FSW joint,riveted joint were obtained by fatigue test of FSW comparative specimens. Result revealed that firstly fatigue cracks in FSW joints were mostly initiated from bottom of the weld seam. Secondly,fatigue behavior of thin plate was slightly better than that of thick plate. Finally,fatigue behavior of FSW joint was significantly better than that of riveted joint. S-N curves for variable thicknesses and stress ratios were fitted,which provided correlative data for application of FSW technology to aircraft structures.

关键词

铝合金搅拌摩擦焊接头S-N曲线疲劳

Keywords

Aluminum alloyFriction stir weldingJointS-N CurveFatigue

references

Views

240

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

FREQUENCY MODIFIED APPROACH FOR FATIGUE LIFE PREDICTION OF PMMA

STUDY ON FATIGUE LIFE OF SUS304 STAINLESS STEEL SPOT WELDED JOINTS (MT)

ONE EVALUATION METHOD FOR THE CONTRIBUTION OF SUBSTRUCTURE STIFFNESS TO ARRAY FRAMEWORK STIFFNESS (MT)

FATIGUE TEST AND CRACK PROPAGATION SIMULATION OF THE SMALL WELDED PIPE

EFFECT OF DIFFERENT STRUCTURAL PARAMETERS ON THE 7075ALUMINUM ALLOY LUG FATIGUE CRACK GROWTH LIFE

Related Author

No data

Related Institution

Research Institute of Unmanned Aircraft,Nanjing University of Aeronautics＆ Astronautics

State Key Laboratory of Mechanics and Control of Mechanical Structures,Nanjing University of Aeronautics ＆ Astronautics

Qinhuangdao Tobacco Machinery Co., Ltd.

School of Mechanical Engineering, Hebei University of Technology

Technology Research and Development Center,China Classification Society

⁰