EQUIVALENT ELASTIC MODULUS OF THE HONEYCOMB CORE BASED ON FEM MODEL

ZHOU JinCui; SHENG MeiPing; ZHANG AnFu

doi:10.16579/j.issn.1001.9669.2015.03.011

您当前的位置：

首页 >

文章列表页 >

EQUIVALENT ELASTIC MODULUS OF THE HONEYCOMB CORE BASED ON FEM MODEL

更新时间：2022-09-22

- EQUIVALENT ELASTIC MODULUS OF THE HONEYCOMB CORE BASED ON FEM MODEL
- Journal of Mechanical Strength Vol. 37, Issue 3, Pages: 488-492(2015)
- 作者机构：
  
  1. 西北工业大学航海学院
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2015.03.011
  CLC：
扫描看全文
ZHOU JinCui, SHENG MeiPing, ZHANG AnFu. EQUIVALENT ELASTIC MODULUS OF THE HONEYCOMB CORE BASED ON FEM MODEL. [J]. 37(3):488-492(2015)
DOI：

ZHOU JinCui, SHENG MeiPing, ZHANG AnFu. EQUIVALENT ELASTIC MODULUS OF THE HONEYCOMB CORE BASED ON FEM MODEL. [J]. 37(3):488-492(2015) DOI： 10.16579/j.issn.1001.9669.2015.03.011.

摘要

建立蜂窝芯层有限元模型,并基于广义胡克定律分析蜂窝芯层中胞元数目对面内等效弹性模量的影响。具体算例表明:蜂窝芯层横向胞元数变化对其面内横向等效弹性模量影响较小,对纵向等效弹性模量影响较大;纵向胞元数变化严重影响蜂窝芯层面内横向等效弹性模量,但对纵向等效弹性模量影响较小。同时得到结论:当蜂窝芯层纵向尺寸与横向尺寸比值小于1.3时,其面内横向等效弹性模量小于纵向等效弹性模量;反之,横向等效弹性模量大于等于纵向等效弹性模量;对于大尺度结构,可建立缩比模型求解其等效弹性模量。

Abstract

The honeycomb core model was built by finite element method（ FEM）. And based on Hooke ’s law,the equivalent elastic modulus of honeycomb core influenced by the change of cell number was studied. The result indicates that the horizontal equivalent elastic modulus is affected slightly while the vertical equivalent elastic modulus is influenced severely by the changes of cell number in horizontal direction. The changes of cell number in vertical direction have a strong impact on the horizontal equivalent elastic modulus while that affect the vertical equivalent elastic modulus slightly. When the ratio of honeycomb core’s size in horizontal direction to that in vertical direction is less than 1. 3,the horizontal equivalent modulus is less than the vertical equivalent elastic modulus. On the other hand,the horizontal equivalent modulus is greater than or equal to the vertical equivalent elastic modulus. For the large-scale structure,a honeycomb core with similar proportion can be established to calculate the equivalent elastic modulus.

关键词

蜂窝芯层等效弹性模量有限元胞元数

Keywords

Honeycomb coreEquivalent elastic modulusFEMCell number

references

Views

452

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

STRESSES ANALYSIS AND MULTI-AXIAL FATIGUE EVALUATION OF RESILIENT WHEEL

EFFECT OF BRAKE THERMAL STRESS ON UNIAXIAL FATIGUE OF RAILWAY WHEEL PLATE

FAILURE ANALYSIS OF THE COATING OF TRANSMISSION MECHANISM BASED ON COHESIVE ZONE MODEL

STEADY-STATE TEMPERATURE FIELD AND STRESS FIELD ANALYSIS OF AUTOCLAVE TOOTH-LOCKED QUICK OPENING STRUCTURE

TWO-DIMENSION FINITE ELEMENT METHOD GEOMETRY MODELING OF POLYCRYSTALLINE MATERIAL MICRO-STRUCTURE

Related Author

No data

Related Institution

Technology Center,Ma’anshan Iron ＆ Steel Co.,Ltd.

Baowu Group Masteel Rail Transit Materials Technology Company Limited

School of Metallurgical Engineering,Anhui University of Technology

Tyre and Wheel Company,Ma’anshan Iron and Steel Co.Ltd.

School of Mechanical Engineering,Beijing Institute of Technology

⁰