DESIGN METHOD OF FLEXIBLE AND THIN TUBE SHEET AND RESEARCH OF STRUCTURE SIZE BASED ON ANSYS

JIANG XiaoZhi; DONG JinShan; LV DongXiang

doi:10.16579/j.issn.1001.9669.2015.01.033

您当前的位置：

首页 >

文章列表页 >

DESIGN METHOD OF FLEXIBLE AND THIN TUBE SHEET AND RESEARCH OF STRUCTURE SIZE BASED ON ANSYS

更新时间：2022-09-22

- DESIGN METHOD OF FLEXIBLE AND THIN TUBE SHEET AND RESEARCH OF STRUCTURE SIZE BASED ON ANSYS
- Journal of Mechanical Strength Vol. 37, Issue 1, Pages: 109-113(2015)
- 作者机构：
  
  1. 南京工业大学机械与动力工程学院
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2015.01.033
  CLC：
扫描看全文
JIANG XiaoZhi, DONG JinShan, LV DongXiang. DESIGN METHOD OF FLEXIBLE AND THIN TUBE SHEET AND RESEARCH OF STRUCTURE SIZE BASED ON ANSYS. [J]. 37(1):109-113(2015)
DOI：

JIANG XiaoZhi, DONG JinShan, LV DongXiang. DESIGN METHOD OF FLEXIBLE AND THIN TUBE SHEET AND RESEARCH OF STRUCTURE SIZE BASED ON ANSYS. [J]. 37(1):109-113(2015) DOI： 10.16579/j.issn.1001.9669.2015.01.033.

摘要

结合具体算例,采用各国挠性薄管板设计方法进行设计,对比其计算结果,指出各设计方法优缺点。运用有限元Ansys软件进行分析,探讨影响挠性薄管板应力分布特征的主要参数,如挠性薄管板厚度、换热管中心距以及过渡圆角半径,最终得出合理的结构尺寸。

Abstract

On the basis of the specific calculation example,the flexible and thin tube sheet was designed with methods of different countries respectively. Comparing the calculation results,the advantages and disadvantages of each design method can be evaluated. In order to study the main parameters,such as the thickness of tube sheet,the center distance of heat exchange tube and the radius of transition fillet,which influence the stress distribution characteristics of flexible and thin tube sheet,the tube sheet was analyzed by finite element software ANSYS. Finally,the appropriate structure dimension was confirmed.

关键词

挠性薄管板设计方法有限元应力分布主要参数

Keywords

Flexible and thin tube sheetDesign methodFinite elementStress distributionMain parameters

references

Views

219

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

UN R127 PEDESTRIAN PROTECTION ANALYSIS AND OPTIMIZATION OF THE VEHICLE

EVALUATION FOR REMAINING LIFE OF BRIDGE CRANE BASED ON RADIAL BASIS NEURAL NETWORK

MILLING OF WEAK RIGID PARTS BASED ON MRF FLEXIBLE AUXILIARY SUPPORT

RESEARCH ON FORCE ANALYSIS AND DETECTION OF QUASI-RECTANGULAR SHIELD MACHINE’S CUTTER HEADS

ANALYSIS OF DYNAMIC LOAD STRENGTH OF WIND TURBINE ROOT BOLT UNDER TURBULENCE MODEL

Related Author

No data

Related Institution

Faw Haima Automobile Co.,Ltd.

Department of Industry and Information Engineering,Vocational Technology College of Hainan

School of Mechanical Engineering, Taiyuan University of Science and Technology

School of Mechanical Engineering, University of Shanghai for Science and Technology

Mechanical Engineering Company,Shanghai Tunnel Engineering Co.,Ltd.

⁰