STUDY ON THE EXPERIMENTAL TECHNIQUES OF DYNAMIC FRACTURE TOUGHNESS OF MATERIALS BASED ON INSTRUMENTED CHARPY IMPACT TEST

XU ZhenQi; ZHU ShiFan; GUO ChunHuan; WANG YanChun; JIANG FengChun

doi:10.16579/j.issn.1001.9669.2015.01.006

您当前的位置：

首页 >

文章列表页 >

STUDY ON THE EXPERIMENTAL TECHNIQUES OF DYNAMIC FRACTURE TOUGHNESS OF MATERIALS BASED ON INSTRUMENTED CHARPY IMPACT TEST

更新时间：2022-09-22

- STUDY ON THE EXPERIMENTAL TECHNIQUES OF DYNAMIC FRACTURE TOUGHNESS OF MATERIALS BASED ON INSTRUMENTED CHARPY IMPACT TEST
- Journal of Mechanical Strength Vol. 37, Issue 1, Pages: 149-153(2015)
- 作者机构：
  
  1. 哈尔滨工程大学机电学院
  2. 超轻材料与表面技术教育部重点实验室,哈尔滨工程大学材料科学与化学工程学院
  3. 中国兵器工业集团北京北方车辆集团有限公司
- 作者简介：
- 基金信息：
- DOI：10.16579/j.issn.1001.9669.2015.01.006
  CLC：
扫描看全文
XU ZhenQi, ZHU ShiFan, GUO ChunHuan, et al. STUDY ON THE EXPERIMENTAL TECHNIQUES OF DYNAMIC FRACTURE TOUGHNESS OF MATERIALS BASED ON INSTRUMENTED CHARPY IMPACT TEST. [J]. 37(1):149-153(2015)
DOI：

XU ZhenQi, ZHU ShiFan, GUO ChunHuan, et al. STUDY ON THE EXPERIMENTAL TECHNIQUES OF DYNAMIC FRACTURE TOUGHNESS OF MATERIALS BASED ON INSTRUMENTED CHARPY IMPACT TEST. [J]. 37(1):149-153(2015) DOI： 10.16579/j.issn.1001.9669.2015.01.006.

摘要

采用预裂纹Charpy冲击试样,基于示波冲击试验建立了测试材料动态断裂韧度的试验方法。与以往预裂纹试样动态应力强度因子的计算方法不同,采用Timoshenko梁理论,提出了一种简单方法来计算三点弯曲试样的刚度K(a),由此建立了三点弯曲试样动态应力强度因子的计算方法,通过实验测得启裂时间,从而确定动态断裂韧度。采用有限元方法对试样动态应力强度因子的理论计算方法进行了验证。结果表明,建立的计算方法准确、可靠,避免了复杂的数值计算,便于工程应用。

Abstract

A measuring method was proposed to evaluate the dynamic fracture toughness of materials using pre-cracked Charpy impact specimens in this work. Different from the previous methods,a simple way to calculate the dynamic stress intensity factors of three-point bending specimen was developed based on the calculation of fracture specimen’s stiffness using Timoshenko beam theory. The fracture initiation time was detected experimentally and then used to determine the dynamic fracture toughness of materials. The calculated values were compared with the results obtained from finite element simulation,a good agreement was found from the comparison between the theoretical calculation and FEA,indicating that the current method proposed in this study is accurate,reliable and convenient for engineering application.

关键词

示波冲击动态断裂韧性三点弯曲试样有限元分析

Keywords

Instrumented Charpy impact testDynamic fracture toughnessThree-point bending specimenFinite element analysis

references

Views

348

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

DESIGN AND SIMULATION VERIFICATION OF METRO ENERGY ABSORBED STRUCTURE BASED ON ASME RT-2 STANDARD (MT)

EXPERIMENTAL STUDY ON FRETTING FATIGUE OF 2024 ALUMINUM ALLOY UNDER ALTERNATING NORMAL LOAD (MT)

CREEP DAMAGE CONSTITUTIVE MODEL OF FE-CR-NI BASED AUSTENITIC STAINLESS STEEL

RESEARCH ON FATIGUE CRACK PROPAGATION BEHAVIOR AND LIFE PREDICTION OF WIND TURBINE GEAR

RESEARCH ON PERFORMANCE OPTIMIZATION METHOD OF MECHANICAL PARTS BASED ON CAD/CAE INTEGRATION

Related Author

No data

Related Institution

Carbody Platform Department,CRRC Changchun

School of Mechanical-Electrical and Vehicle Engineering, Beijing University of Civil Engineering and Architecture

Beijing Key Laboratory of Performance Guarantee on Urban Rail Transit Vehicles

School of Mechanical Engineering,Inner Mongolia University of Science and Technology

School of Mechanical and Power Engineering,Nanjing Tech University

⁰