XIA Bingxin,WANG Dan,SHANG Li,et al. Study on frequency deviation of outer ring defect of ball bearings caused by temperature-variable gap[J]. Journal of Mechanical Strength,2025,47(10):36-42.
XIA Bingxin,WANG Dan,SHANG Li,et al. Study on frequency deviation of outer ring defect of ball bearings caused by temperature-variable gap[J]. Journal of Mechanical Strength,2025,47(10):36-42. DOI: 10.16579/j.issn.1001.9669.2025.10.004.
STUDY ON FREQUENCY DEVIATION OF OUTER RING DEFECT OF BALL BEARINGS CAUSED BY TEMPERATURE-VARIABLE GAP
The gap between the rotor and the ball bearing in a wide temperature range increases with the increase in temperature. At the same time
the internal clearance of the bearing changes with the temperature. The inner ring of the bearing is subject to increased friction torque
which reduces its speed. This results in the deviation of the characteristic frequency of the outer ring defect
which is not conducive to the fault diagnosis of the ball bearing and the stable operation of the equipment. Considering the temperature-variable gap between the rotor and the bearing
a dynamic model of the bearing with an outer ring defect in a wide temperature range was established. The time-domain waveform and frequency of the model were analyzed. The simulation and test results show that the bearing vibration increases with the temperature
and the characteristic frequency of the outer ring defect decreases with the increasing temperature. Properly increasing the interference between the rotor and the bearing according to process requirements is beneficial for reducing the bearing system vibration in a wide temperature range and improving the accuracy of bearing defect frequency identification. The results provide reference for the use and health monitoring of ball bearings in a wide temperature range.
关键词
Keywords
references
XU H Y , WANG P F , MA H , et al . Analysis of axial and overturning ultimate load-bearing capacities of deep groove ball bearings under combined loads and arbitrary rotation speed [J]. Mechanism and Machine Theory , 2022 , 169 : 104665 .
ZHANG P Y , CHEN C Z . Wind turbine planetary gearbox fault diagnosis using circular pitch cyclic vector and a bidirectional gated recurrent unit [J]. Measurement Science and Technology , 2023 , 34 ( 1 ): 015105 .
SHI H T , BAI X T , ZHANG K , et al . Spalling localization on the outer ring of hybrid ceramic ball bearings based on the sound signals [J]. IEEE Access , 2019 , 7 : 134621 - 134634 .
ZHANG K , FAN C Z , ZHANG X C , et al . A hybrid deep-learning model for fault diagnosis of rolling bearings in strong noise environments [J]. Measurement Science and Technology , 2022 , 33 ( 6 ): 065103 .
BAI X T , SHI H T , SUN J , et al . Localization of double spalling on the outer rings of paired ball bearings by time-delay sound analysis [J]. Measurement Science and Technology , 2021 , 32 ( 9 ): 094002 .
DARMO S , BAHIUDDIN I , HANDOKO P , et al . Failure analysis of double-row tapered roller bearing outer ring used in Coal Wagon Wheelset [J]. Engineering Failure Analysis , 2022 , 135 : 106153 .
SHI H T , LI Y Y , BAI X T , et al . Investigation of the orbit-spinning behaviors of the outer ring in a full ceramic ball bearing-steel pedestal system in wide temperature ranges [J]. Mechanical Systems and Signal Processing , 2021 , 149 : 107317 .
SHI H T , BAI X T , ZHANG K , et al . Effect of thermal-related fit clearance between outer ring and pedestal on the vibration of full ceramic ball bearing [J]. Shock and Vibration , 2019 , 2019 : 8357807 .
BAI X T , ZHENG H , WANG Z N , et al . Investigation on the misalignment of full ceramic ball bearing rotor system caused by varying gap in wide temperature ranges [J]. Proceedings of the Institution of Mechanical Engineers ,Part C:Journal of Mechanical Engineering Science, 2024 , 238 ( 13 ): 6158 - 6169 .
WU Y H , YAN H P , LI S H , et al . Calculation on the radiation noise of ceramic ball bearings based on dynamic model considering nonlinear contact stiffness and damping [J]. Journal of Sound and Vibration , 2020 , 479 : 115374 .
BAI X T , SHI H T , ZHANG K , et al . Effect of the fit clearance between ceramic outer ring and steel pedestal on the sound radiation of full ceramic ball bearing system [J]. Journal of Sound and Vibration , 2022 , 529 : 116967 .
CAO H R , SHI F , LI Y M , et al . Vibration and stability analysis of rotor-bearing-pedestal system due to clearance fit [J]. Mechanical Systems and Signal Processing , 2019 , 133 : 106275 .
XU H Y , WANG P F , YANG Y , et al . Effects of supporting stiffness of deep groove ball bearings with raceway misalignment on vibration behaviors of a gear-rotor system [J]. Mechanism and Machine Theory , 2022 , 177 : 105041 .
LIU Z M , BAI X T , SHI H T , et al . A recognition method for crack position on the outer ring of full ceramic bearing based on the synchronous root mean square difference [J]. Journal of Sound and Vibration , 2021 , 515 : 116493 .
BAI X T , ZHENG H , WANG Z N , et al . Raceway defect frequency deviation of full-ceramic ball bearing induced by fit clearance in wide temperature ranges [J]. Shock and Vibration , 2021 , 2021 ( 1 ): 6650798 .
LUO Zai , FEI Yetai , MIAO Enming . Study on thermal deformation of hollow piece in steady temperature field [J]. Transactions of Materids and Heat Treatment , 2004 , 25 ( 2 ): 25 - 27 . (In Chinese)